Rear Brakes: 13 min 30 sec

[pilot]

Wow, that felt good. A 6mm Hex key, Torque wrench, big screwdriver and a pair of plies is all it took.

Save yourself time, money and learn something. DIY.

[dm_gsxr]

It took me about 30 minutes to replace the pads on my in part because I had to remove the rear plastic so I could get to the brake fluid. It took about the same amount of time to do both of the front brakes about a month ago.

And the front brakes are just dropped in with a couple of pins and individual cotter pins but the rear has a cotter pin clip and a couple of pressure wires. That was a pain to get back together.

Carl

[Jayock]

Wow, that felt good. A 6mm Hex key, Torque wrench, big screwdriver and a pair of plies is all it took.

Save yourself time, money and learn something. DIY.

Pshhh.. Only took me 13 min 20 sec.

Noob!

[Nick_Ninja]

I did my tire too. :roll:

[pilot]

Pshhh.. Only took me 13 min 20 sec.

Noob!Took a 15 second break to look at the clouds rolling by.


I did my tire too. :roll:
That's only because it's got a hole in it.

[mushin_man39]

What are rear brakes and where would I find them?

[Nick_Ninja]

<snip>That's only because it's got a hole in it.

And it was a tight fit too :D