PDA

View Full Version : F1 Error Code Diagnostic


InlineSIX24
Mon Sep 17th, 2007, 11:08 AM
Does anyone know if you can jumper pins on the 05' GSX-R 750 to read codes on the dash similar to the older model bikes and the procedure to do so, or does it have to be read by a dealer?
Also would the computer store codes for later reading like a car's computer if the error is not detected when the bike is restarted?
Clarkie
Mon Sep 17th, 2007, 07:12 PM
yes jump it, no wont store it
swademaster
Mon Sep 17th, 2007, 07:36 PM
:imwithstupid:
InlineSIX24
Mon Sep 17th, 2007, 08:05 PM
Got it. Thanx. I saw a post about earlier models having a 2 wire connector inside the tail section. Is this the same on the late?
Clarkie
Mon Sep 17th, 2007, 08:24 PM
white plug with a black rubber cover over it just behind the battery, i think it is the white/red stripe and black/white stripe wires, i know its teh two at one end of the plug, the other end only has one wire
InlineSIX24
Tue Sep 18th, 2007, 09:03 AM
Right on. Thanks for the info.