View Full Version : 1991 GSXR frame - steel or aluminum?
Filo
Thu Oct 9th, 2008, 10:51 AM
Well, the title says it all. Did the 1991 GSXR have an aluminum or steel frame? Any material difference (one steel the other alum) between the 750 and the 1000?
CYCLE_MONKEY
Thu Oct 9th, 2008, 10:55 AM
Well, the title says it all. Did the 1991 GSXR have an aluminum or steel frame? Any material difference (one steel the other alum) between the 750 and the 1000?
"Cough*....use a magnet....*cough!
I'm 99.9% sure EVERY Gixxer (of any displacement) since the original '85 750 uses an aluminum frame. Only the Kan-a-Tuna's had the steel frames.
P.S. You're still a hamster-f#cker though......
TFOGGuys
Thu Oct 9th, 2008, 10:58 AM
GSXR750s ALL have aluminum frames 85 to date. The 1100 frame is a bit different (beefier, has mounting points for the airbox trim panels), but the 1100 motor is basically a bolt in in the 750 frame. The 90-91 750 frame is shorter than the 1100 the same years, with .5 degree less rake.
CYCLE_MONKEY
Thu Oct 9th, 2008, 11:00 AM
GSXR750s ALL have aluminum frames 85 to date. The 1100 frame is a bit different (beefier, has mounting points for the airbox trim panels), but the 1100 motor is basically a bolt in in the 750 frame. The 90-91 750 frame is shorter than the 1100 the same years, with .5 degree less rake.
Thanks for the verification.
You're still a hamster f#cker too though......
Filo
Thu Oct 9th, 2008, 11:00 AM
"Cough*....use a magnet....*cough!
There is an idea. I wish I had thought of that. :) Now all I need is a 200 mile long arm. I can't ask the person who's bike it is either, so don't bother with that suggestion too.
Marmot f*cker.
TFOGGuys
Thu Oct 9th, 2008, 11:23 AM
Thanks for the verification.
You're still a hamster f#cker too though......
Nah...hamsters are too small... I prefer beavers....gotta watch for the teeth though...http://bp3.blogger.com/_lGNADH5L7Fc/R0L9vA3T9SI/AAAAAAAAATI/ddPpF_O0R5U/s400/beavs.jpg
CYCLE_MONKEY
Thu Oct 9th, 2008, 05:04 PM
There is an idea. I wish I had thought of that. :) Now all I need is a 200 mile long arm. I can't ask the person who's bike it is either, so don't bother with that suggestion too.
Marmot f*cker.
Sheesh, well you didn't mention that in your post....
Gerbil receiver.....:shocked:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.