PDA

View Full Version : Honda Help in Foco



kbahus
Mon Jun 6th, 2011, 09:10 PM
In an attempt to bend back a bent peg on my Honda 599 I cracked it. I did not think ahead and now have screwed up my daily commuting and riding till I find a replacement. Does anyone have a pair of fold up style pegs off a Honda 600/1000 laying around I could buy? I think they are all interchangeable. Does anyone know if any of the local shops would have something in stock? Thanks!

bendavis
Mon Jun 6th, 2011, 09:11 PM
i have the passenger pegs off an f4i I can get you, no clue it that'll help

kbahus
Mon Jun 6th, 2011, 09:14 PM
I think the pass pegs are different, at least they are on the 599. Thanks for the offer though!

OUTLAWD
Mon Jun 6th, 2011, 09:24 PM
you might be able to get aftermarket pegs to hold you over, I doubt the dealer would have a factory one in stock, but couldn't hurt to call I-state Honda.

a non-honda one might even be able to be drilled to hold you over

TinkerinWstuff
Mon Jun 6th, 2011, 09:31 PM
there's no place for Honda's in foco

Filo
Mon Jun 6th, 2011, 09:39 PM
there's no place for Honda's in foco

Interstate Honda reopened. Or at least, they were supposed to open this last weekend.

MattTLS
Mon Jun 6th, 2011, 09:53 PM
Could you post a picture of what you've got -- I have a few different older pegs that may hold you over.

TinkerinWstuff
Mon Jun 6th, 2011, 09:57 PM
Interstate Honda reopened. Or at least, they were supposed to open this last weekend.

no kidding? They should have a grand opening with popcorn and stunt bikes

kbahus
Mon Jun 6th, 2011, 10:02 PM
Here you go:

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248489_614661786413_72203123_33413094_1557906_n.jp g

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254497_614661826333_72203123_33413095_1930647_n.jp g

It looks like all of these will interchange:
CB599F (04-08
CBR600F1 (87-90
CBR600F2 (91-94
CBR600F3 (95-98
CBR600F4 (99-00
CBR600F4i (01-08
CBR600RR (03-11
VFR800 (98-11
CB919 (02-08
CBR929 (00-01
CBR954 (02-03
CBR1000 (91-97
CBR1000RR (04-11
VTR1000 (97-05
RC51 (00-05

MattTLS
Mon Jun 6th, 2011, 10:47 PM
Not on your list, but it might work until you find a proper replacement (from an NT650)
http://img.photobucket.com/albums/v691/colorado_mat/2011-06-06_22-34-33_656.jpg

kbahus
Mon Jun 6th, 2011, 10:52 PM
I am going to run over to to a couple shops on my lunch break and if no dice I will shoot you a pm. Thanks!

Vellos
Mon Jun 6th, 2011, 11:43 PM
McGuyver that shit with a carriage bolt. That's what I did with my minimoto today.

kbahus
Tue Jun 7th, 2011, 05:25 PM
I rode to work with it after jumping on it and determining it won't explode right away. Took it all apart once I got there and found it was cracked totally through both sides. Ended up throwing on a passenger peg that fit decent enough for the ride home...and a side trip around the reservoir :) I ordered some Competition Werkes pegs from Ryan over at Fort Collins Motorsports. The pair of those was only a few dollars more than an oem replacement from Interstate Honda. Thanks for the help guys. Hopefully the new pegs work out well. I am curious to see what how they ride going from rubber style pegs.

OUTLAWD
Tue Jun 7th, 2011, 05:45 PM
having one bike with rubbers, and the other without, I can only tell a difference after a couple hundred miles...it could also just be the gsxr (metal pegs) has more vibrations in general over my rolling couch