PDA

View Full Version : Now its my brake lights!!!!!



haywood jablome
Thu Sep 4th, 2003, 06:41 PM
This is what i have for wires. How do i hook them up? I cant remember how i had them. HELP ME PLEASE!!!!!!

Bike Side

TURN SIGNAL
Black
Black with White Strip

TURN SIGNAL
Lime Green
Black with White Strip

RUNNING/GROUND/BREAK
White with Black Strip
Black with White Strip
Brown


TAIL LIGHTS
Black
Black with White Strip
Red



INTAGRATER
IN FROM BIKE

Green--Right Turn
Red----Break
Yellow-Left turn
Brown-Tail




OUT TO TAIL LIGHT

Green-----Right Turn/Brake
Yellow-----Left Turn/Brake
Brown-----Tail

http://www.gixxer.com/uploads/tail_light_1.JPG

http://www.gixxer.com/uploads/tail_light_2.JPG

http://www.gixxer.com/uploads/tail_light_3.JPG

Hutch
Thu Sep 4th, 2003, 08:48 PM
Depends on what kind of bike you have...couldn't tell from the pics and didn't see one listed on your sig. I have a list for all the different kinds of bikes. Let me know and I'll send you what I have.

haywood jablome
Thu Sep 4th, 2003, 08:50 PM
YES YES YES 2000GSXR750 remember i lead the ride Monday

mikesf4i
Thu Sep 4th, 2003, 10:04 PM
Plz tell me that you are NOT using wire nuts on your wiring!!! Wire nuts are not designed for the high vibration of life in a motorcycle. Plz solder your wires or use enviromentally sealed splices.

I installed that same integrator on my bike. But I used it to get the turn signals to come on with my brake lights.

I cannot help you with the wire colors but I could get it working with a meter if you cannot figure it out. I wire stuff on helicopters for a living. Let me know if you need help.

Anonymous
Thu Sep 4th, 2003, 10:09 PM
Soldering can be bad on automotive applications as well - I know of several land speed racers that will not use it. If you use too much it wicks up the wire and causes it to break from vibration.

Hutch
Thu Sep 4th, 2003, 10:23 PM
Typical wire colors for the GSXR...

Ground = Black/White Tracer
Brake = White/Black Tracer
Left Turn = Black
Right Turn = Light Green
Tail = Brown

Into Integrator...
Right Turn = Yellow
Brake Light = Red
Tail Light = Green
Left Turn = Orange

Out of Integrator...
Purple = Right Brake
White = Right Tail
Brown = Left Tail
Blue = Left Brake
Black = Ground

Hope this helps. If not, there is always the integrator web site...
www.integratorkit.com or www.flashalert.com

haywood jablome
Fri Sep 5th, 2003, 07:10 AM
I was using wire nuts to try to figure outht the wire combination. I use Tube connecters. Thanks for the input guys. Ill try this tonight and get back to you all. Chad

gixxerjarhead
Fri Sep 5th, 2003, 11:24 AM
chad i bet u will go through a bunch of fuses before u get it right :lol: :lol: :lol: :lol: :lol:

haywood jablome
Fri Sep 5th, 2003, 04:17 PM
And a bitch slap for Ron!!!

haywood jablome
Fri Sep 5th, 2003, 07:21 PM
So i got it all hooked back togather. My break lights are realy Dim like you can almost not see them .WTF is wrong now?

haywood jablome
Sat Sep 6th, 2003, 09:45 AM
anyone help out?

mikesf4i
Sat Sep 6th, 2003, 12:20 PM
Did you swap the wires for the brake lights and running lights?

haywood jablome
Sat Sep 6th, 2003, 12:34 PM
dont think so i tried it both ways and both ways it was the same. DAMN IT