PDA

View Full Version : Final Dyno Pull



Husky
Fri Apr 12th, 2013, 03:52 PM
http://i13.photobucket.com/albums/a293/MHusky/38d4d678-3139-4529-af29-9c07e9340ceb_zpseb1fd56f.jpg (http://s13.photobucket.com/user/MHusky/media/38d4d678-3139-4529-af29-9c07e9340ceb_zpseb1fd56f.jpg.html)-

birchyboy
Fri Apr 12th, 2013, 04:03 PM
Damn, that's a lot of power.

Grim2.0
Fri Apr 12th, 2013, 04:20 PM
Holy crap!

jcj81
Fri Apr 12th, 2013, 04:23 PM
Awsome :headbang:

CYCLE_MONKEY
Fri Apr 12th, 2013, 04:31 PM
Cool! If you can build an engine strong enough, you can turn the boost (and power) up to insane levels. I seem to remember in the F1 "turbo" era, they were getting 1,500hp out of a 1.5liter I-4 in qualifying trim!:o

3point5
Fri Apr 12th, 2013, 04:36 PM
great pulls…at what RPM are you making your 280?

Husky
Fri Apr 12th, 2013, 04:44 PM
great pulls…at what RPM are you making your 280?

Thanks guys, very excited to try it out at the track and increase the boost throughout the season.

The rpm was right around 10,500. Red line is 11,200

3point5
Fri Apr 12th, 2013, 06:24 PM
Thanks guys, very excited to try it out at the track and increase the boost throughout the season.

The rpm was right around 10,500. Red line is 11,200

wow…at 154 ft*lbs I figured something like 23500 rpm to make that…very nice -

madvlad
Fri Apr 12th, 2013, 06:30 PM
Very nice numbers for pump gas

Cornfed
Fri Apr 12th, 2013, 06:44 PM
Impressive. Mike over at Quick Cycles is good turd.

3point5
Fri Apr 12th, 2013, 07:08 PM
just realized the RPMs are at the bottom of the plot...

Matrix
Fri Apr 12th, 2013, 10:51 PM
:w00t: What a rush that has to be!