What can I do for my helmet........it whistles and its driving me crazy?
What can I do for my helmet........it whistles and its driving me crazy?
close your mouth and wear ear plugs, it isn't the helmet
What brand?
Also in the future, post in "Gear and Accessories" where this belongs.
Unless this is a way to start another BS thread and get the most views.
303 Cycle | FaceBook | Twitter | Google Plus |
MRA #161 : 2014 Sponsors - Bell, Knox, Silkolene, Forma Boots, Chicken Hawk Racing, Bazzaz
You just put your lips together - and blow. (Lauren Bacall)
"For what I do is not the good I want to do; no, the evil I do not want to do—this I keep on doing....What a wretched man I am! Who will rescue me from this body of death?"
Slap it with a sexual harassment suit.Originally Posted by Kitelovers
What can I do for my helmet........it whistles and its driving me crazy?
Be assured that a walk through the ocean of most souls would scarcely get your feet wet.
cut your head off.
then boil your head with the ear plugs
Last edited by dapper; Thu Feb 22nd, 2007 at 06:09 PM.
It works! Slow in, Fast out
"Sarcasm is difficult to convey on the internet, especially if the people reading it don't know you personally". By Spiderman
Neither irony nor sarcasm is argument. By Rufus Choate
Be smart, be nice, do what'cha love and always have fun.
Let food be your medicine, and medicine be your food. - Hippocrates
I will use treatment to help the sick. I will never use it to injure them or wrong them. I will not give poison to anyone. - The Hippocratic Oath
Since this may be of use to someone else too...
odds are it's the visor isn't fully seated against the rubber seal around the eye-port. There should be one or more screws on each hinge assembly that can be used to snug the visor to the seal. I've only done this once, and it was pretty simple: remove the visor; loosen the screw(s); slide the hinge assembly towards the back of the helmet; tighten screw(s); check fitment.
Bob <------ Asshole Nazi devil moderator out to get each and every one of you
- 2002 Yamaha R1 (92K+ miles... bought new) ---------------------------------------->
- 2015 Yamaha Bolt C-Spec (Cafe Racer)
- 2004 Yamaha R6 (racebike)
- 2006 Yamaha R1 (racebike)R.I.P. 502 ~ Everything works out in the end. If it hasn't worked out, it isn't the end.
Thanks Mr. Spiderman........I'll give it a try!
Just remembered... you may not have to remove the visor to do this... that might be helmet/brand dependent tho.
- 2002 Yamaha R1 (92K+ miles... bought new) ---------------------------------------->
- 2015 Yamaha Bolt C-Spec (Cafe Racer)
- 2004 Yamaha R6 (racebike)
- 2006 Yamaha R1 (racebike)R.I.P. 502 ~ Everything works out in the end. If it hasn't worked out, it isn't the end.
My helmets came with a little tube of silicone to keep the rubber seal around the eyes soft. It wakes a HUGE difference.
Kim & Dean
60th Anniversary R6 - '16 R1M
.
I had a helmet that started whistling suddenly, and it turned out that one of the little screws that is used to hold on tear-offs had fallen out and there was a small hole in my visor that was left behind. I just put a piece of scotch tape over it.
Posting Permissions
Reply With Quote
