Rocky Mountain Supermoto - Round 4

[Bueller]

Round 4
6/10/07

Rocky Mountain Supermoto






Signup ………………………………................7:00am - 8:00am

Tech………………………………....................7:00am - 8:00am

Rider’s Meeting……………………..….……. 7:45am

Practice Starts …………………..…………....8:15am sharp!
Slow/ P Mini..…………………….....................15 Min
Fast………..………………………....................15 Min
Colorado ……………………………….............10 Min
Slow/P Mini……………………….....................10 Min
Fast……….……………….………....................10 Min
Colorado ……………………………….............10 Min
Mini ………………………………....................10 Min

Heat Races Start …………………..…………..9:45am Sharp!
Heat 1, Novice/Middleweight ………………….5-7 Min
Heat 2, Adult/Youth Mini ………………………5-7 Min
Heat 3, 30+ ………………………………..........5-7 Min
Heat 4, Colorado ………………………………..5-7 Min
Heat 5, Sportsman/Premier Mini ……………….5-7 Min
Heat 6, Lightweight …………………………….5-7 Min
Heat 7, Open ………………………………........5-7 Min

Break

Main Event Group 1 Start ……………………11:00am Sharp!
Main 1, Sportsman/Premier Mini………………..8-10 Min
Main 2, 30+ ………………………………..........8-10 Min
Main 3, Adult/Youth Mini ………………………8-10 Min
Main 4, Open ………………………………........14-16 Min

Break

Main Event Group 2 Start …………………….12:15pm Sharp!
Main 5, Colorado ………………………………..8-10 Min
Main 6, Lightweight ……………………………..8-10 Min
Main 7, Novice ………………………………......8-10 Min
Main 8, Middleweight ……………………………14-16 Min

Trophy Presentation ……………………………1:30pm

[krod]

Shit I might be on the fuckin DRZ.

[Bueller]

What are you missing? The rotor and?

[krod]

Front pads on back order. (mine are down to the backing). Brake master cylinder blown piston seal.

[Bueller]

Crap can't even canabalize that off of my EXC, would have to change over entire front end

[krod]

Hope Elite has something is stock. If not I guess its the sportsman class for me. That should be a easy 2nd place ( I will be the only entery)

[Filo]

Front pads on back order. (mine are down to the backing). Brake master cylinder blown piston seal.

I have a Brembo master cylinder you can borrow. It has kind of a long lever, but I give you permission to cut it down. It is one for one of the older Ducati's, but it is brand new. I got it for the Honda, but haven't taken the time to put it on yet. It looks like this:

http://www.yoyodyneti.com/ProductInf...tid=10.4620.86

Let me know if you want to borrow it.

[krod]

Thanks Filo I might take ya up on that. Will let you know tommorow. Have you updated the hsr411 site yet? I have some pics for it.

[Filo]

Thanks Filo I might take ya up on that. Will let you know tommorow. Have you updated the hsr411 site yet? I have some pics for it.

Send me the pics. I am playing around with the site tonight, but won't be done until tomorrow or Wed.

[Bueller]

I might need tires this weekend, krod what do you have again, might want to try some DOT's, are they all take-offs? I can bring the tire changer with me.
Any interest in staying up there Sat. night?

[krod]

Bark at TK came through (thanks). They had the pads overnighted. Elite had the rotor and I robed some parts out of a Power Glide trans to fix the blown piston seal on my brake master cyl.

I have good set of Dot's if ya need them. Or I have some good slicks. A couple of new Michelin sm sets also.

[mikesf4i]

Hopefully I will be bringing the rugrats up there for their first race.

[krod]

Dave are you going to camp out? If so I am in.

[Bueller]

I think so, just got the YZ back together this evening so I should be good to go. Gonna try to get there by 2:00 Sat.

[krod]

Sounds good. I will bring some tires with me. Filo ya need a set?

[Bueller]

bring a set of the takeoffs, i'll probably run those. i think adam has fairly new mich's

[Filo]

Sounds good. I will bring some tires with me. Filo ya need a set?

I think I am OK on tires. My bike is puking oil into the air cleaner housing now though. Any thoughs?

[Bueller]

Too much oil

[green_zx7r]

Good luck tomorrow guys. I'll most likely be there around 10-11am and hang out for a bit.

Yusuke