Page 2 of 3 FirstFirst 123 LastLast
Results 25 to 48 of 65

Thread: Superhawk Wrench Party - DATE CHANGED!! Read my latest post

  1. #25
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Ok, the right side gasket will set you back $10.37, fork oil is $3.47 a bottle (5W or 10W), and coolant is $2.53 a bottle (will need 3 of these I think).

    So total cost for the advancer:
    $47.25 - advancer
    $10.37 - gasket
    $7.59 - coolant
    $5 extra for shipping
    -----------
    $70. And I guarantee you will not get it cheaper anywhere else, period - this is just about flat dealer cost on all of this stuff.

    Fork oil, I figure a couple bottles? I'll find out for sure. Going to definitely do mine, for $10 why not! (That $10 should include the shipping addon)

    Carb Sync + TPS (you get both or none, since I need to buy parts at the same place and will just get all at once): $5

    Suspension tune - as best as we can get it, $free

    Short of jetting the bike, which I cannot do, these are the top upgrades along with the aftermarket filter, which Pachuco is doing as well.

  2. #26
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Quote Originally Posted by vtr1000rider
    I'd be looking to tune in the suspension, ignition advance, possible K&N filter.

    Let me doulbe check the new date, but at first glance it seems fine.

    Money Money Money, let me know how much and you'll have it!
    We won't be replacing the springs or anything, but here you go:
    Fork oil: $10
    Advancer: $70
    BMC filter: $67 (need to adjust for shipping there)

    Let me know what ya want to do, will need the money within a week since I have to get the mortgage co their funds too.

  3. #27
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Quote Originally Posted by Coloradoray
    I would like to do carb sync, TPS, and fork oil, brake and clutch fluid.
    $15 for the first 3 things there. Brake+Clutch fluid = a good bottle of DOT4 or two, gonna be under $10 for those.

  4. #28
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    I'll take everything except the bmc filter, already have a K&N. From the math I did it looks like 85$ without the kickback to you.
    If you don't mind I will bring over a clutch lever and flush mount turn signals to install. I can do it myself but I may need a pointer or two. Do you need me to bring anything over?
    How would you like to get the payment, mail a check or cash on the 31st?
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  5. #29
    Board Newbie
    Join Date
    Jul 2004
    Location
    Littleton, CO
    Posts
    5
    I would like to do carb sync, TPS, and fork oil. $ on its way. Thanks!

  6. #30
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    shmoab - please mail the check, or paypal it.

    Milehigh - how you sending me the money? I haven't said where yet!

  7. #31
    Board Newbie
    Join Date
    Jul 2004
    Location
    Littleton, CO
    Posts
    5
    I know, I PM'd you soliciting the info. Got ahead of myself.

  8. #32
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Quote Originally Posted by MileHighHawk
    I know, I PM'd you soliciting the info. Got ahead of myself.
    You did? Never got it.

    I'll PM ya with it.

  9. #33
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    Quote Originally Posted by rforsythe
    shmoab - please mail the check, or paypal it.

    Milehigh - how you sending me the money? I haven't said where yet!
    Ok...where to send it and exactly how much?
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  10. #34
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177
    hey Ralph,
    Is this still going on this saturday and did you get the parts in?
    Where are we meeting and what time? your house? if so where do you live ? need some directions....
    inquireing minds what to know.
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  11. #35
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Yeah, well, here's the deal kids... I will NOT have the parts in time for this Saturday.

    So rather than just throwing out dates and all I want to let you all decide on when you are available. I am not going to be able to do it the weekends of the 7th/8th, or 28th/29th, but anything else is fair game. We can even do it over a couple evenings... Prolly should give it a couple weeks just to be on the safe side here. I'm not racing on the 15th so I'm certainly open to that one...

    Let me know what you guys want to do here.

  12. #36
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177
    I am open on the 15th. that sounds good to me.
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  13. #37
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    Sundays are out for me. Any Saturday next month is good.
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  14. #38
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Ok, let me see what we can work out for a Saturday. 21st maybe?

    shmoab - on your clutch lever, if you have the new one we can swap that out anytime really, it's easy to do.

  15. #39
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177
    what about the 14th?
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  16. #40
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177
    So what date are we going to do this?
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  17. #41
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    Quote Originally Posted by rforsythe
    Ok, let me see what we can work out for a Saturday. 21st maybe?

    shmoab - on your clutch lever, if you have the new one we can swap that out anytime really, it's easy to do.
    I already did it. I called Fay Myers to schedule the clutch lever replacement. The mechanic that answered the phone said he would do it for free if I brought my bike in. Then he said if I want to even save more time I just need to use a 10mm wrench, remove the bolt, take clutch lever off, put new one on, replace bolt, and tighten. It was really that easy and I felt like an idiot for losing a 2 weeks of riding time over it.

    Anyway, thanks for the offer. When are we going to have this shindig?
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  18. #42
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    When are we going to get a date? I'm having a hard time keeping all my weekends open.
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  19. #43
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177

    Ralph did the parts come in?
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  20. #44
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    They've been shipped, so I should get them this week (along with about 100 other things for my 600 from hell).

    How about the 22nd? I'd like to keep that saturday open if possible in case I need shop-assistance working on the racebike, though the 21st isn't totally out of the question.

    I feel bad for postponing it again and I know your schedules are a little more inflexible than mine, so let me know what works for you all. Only thing about the 21st, is that I will need to finish up by 6pm since I need to work that night.

  21. #45
    Member Pachuco's Avatar
    Join Date
    Dec 2003
    Location
    Northside for life!
    Posts
    177
    No problem.
    I am a go for the 22nd.
    anyone else have an issue?
    if not lets do it then.
    Tom
    2003 SuperHawk

    Why geeks like computers: unzip, strip, touch, finger, grep, mount, fsck, more, yes,fsck,fsck,fsck,umount, sleep.

  22. #46
    Member
    Join Date
    Apr 2004
    Location
    Englewood, CO
    Posts
    166
    I don't get off work until 2pm on the 22nd. I can come over then if you think it won't be a problem.
    LCpl. USMC (Ret.)
    '01 VTR1000F (red)



    War is Peace
    Freedom is Slavery
    Ignorance is Strength


    I'm a Roughneck on a drilling rig. It's kinda of a hard job.

  23. #47
    Senior Member
    Join Date
    Sep 2002
    Posts
    4,247
    Quote Originally Posted by shmoab
    I don't get off work until 2pm on the 22nd. I can come over then if you think it won't be a problem.
    Yep, that'll work.

  24. #48
    Junior Member Spoiled's Avatar
    Join Date
    Mar 2004
    Location
    Northglenn
    Posts
    35
    Quote Originally Posted by Pachuco
    No problem.
    I am a go for the 22nd.
    anyone else have an issue?
    if not lets do it then.
    Someone forgot he is going to PPIR for the Honda Indy 225 that day.
    Could you possibly work on it Sat the 21st
    Ralph, do you know if you'll have to work for sure?
    Mary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •