Results 1 to 10 of 10

Thread: Plating Dirtbike/Supermoto

  1. #1
    Junior Member specialk_34's Avatar
    Join Date
    Sep 2003
    Posts
    31

    Plating Dirtbike/Supermoto

    Hi guys,

    I was wondering if someone could tell me how I go about plating a dirtbike that recently bought used and only have a bill of sale for (in Denver)? I did it once before but I've long since forgotten so any help would be great.

    Thanks,
    Kang

  2. #2
    Senior Member krod's Avatar
    Join Date
    Oct 2002
    Location
    Racing sumo somewhere
    Posts
    849

    Re: Plating Dirtbike/Supermoto

    Make sure ya have a head light, tail light, mirror and some type of horn. Go to the dmv get a vin verification apply for a title and thats about it.
    HighSide Racing
    Marine Corps vet
    http://roadrunnertg.com/

  3. #3
    Gold Member Bueller's Avatar
    Join Date
    Dec 2003
    Location
    El Tardo
    Posts
    8,885

    Re: Plating Dirtbike/Supermoto

    Does the bill of sale state it is for "offroad use"?


  4. #4
    Junior Member specialk_34's Avatar
    Join Date
    Sep 2003
    Posts
    31

    Re: Plating Dirtbike/Supermoto

    Thanks for the quick replies guys.

    Bueller- it was a private party sale so all I have is a signed receipt that says "1 YZF 250 with VIN xxxx to Kang Soh for $xxxx"- don't have anything other than that. Can I use that for a title?

    Krod- When I did this for my other dirtbike a few years ago, I remember having to fill out some sort of form with the DMV that listed the VIN and was a sworn statement that it had a horn, mirror, etc. I don't remember having to do anything other that..

    So the question is, with just a receipt, do I just go down to the DMV to do a VIN verification, then take that to get a plate?

  5. #5
    Senior Member krod's Avatar
    Join Date
    Oct 2002
    Location
    Racing sumo somewhere
    Posts
    849

    Re: Plating Dirtbike/Supermoto

    Yep but they will inspect the bike.
    HighSide Racing
    Marine Corps vet
    http://roadrunnertg.com/

  6. #6
    Junior Member specialk_34's Avatar
    Join Date
    Sep 2003
    Posts
    31

    Re: Plating Dirtbike/Supermoto

    Do you know if I have to make an appointment to get the VIN verification done? And do I just bring the bill of sale? Also, do you know what the form was that you needed to fill out at the DMV to apply for a plate & title? One other question is- when they do a vin verification, do the lights actually have to function, or do they just visually verify that they are there?
    Last edited by specialk_34; Sun Sep 23rd, 2007 at 10:41 PM.

  7. #7
    Gold Member Bueller's Avatar
    Join Date
    Dec 2003
    Location
    El Tardo
    Posts
    8,885

    Re: Plating Dirtbike/Supermoto

    My esteemed teammate is incorrect about the inspection.
    You need a bill of sale that states the vehicle is being sold for "off road use" or the MSO/MCO, a VIN verification (a dealer can do this) and a certificate of equipment compliance. Available here:
    http://www.nctr.net/Street%20Legal%2...et%20Legal.htm

    This will get you a title, inorder to get plates you will have to have proof of insurance on the bike. This makes the bike plated, not street legal, so if you don't have DOT lights, and a switch operated stop light, a horn one mirror and DOT tires you are subject to tickets.

    BTW the amount on the BOS will determine the sales tax you pay when you title the bike.


  8. #8
    Senior Member krod's Avatar
    Join Date
    Oct 2002
    Location
    Racing sumo somewhere
    Posts
    849

    Re: Plating Dirtbike/Supermoto

    I hope I am wrong about the inspection. I have to get vin verification's all the time at work. A CSP officer comes out and inspects every one for the matching Vin numbers and does a safety inspection.
    HighSide Racing
    Marine Corps vet
    http://roadrunnertg.com/

  9. #9
    Gold Member Bueller's Avatar
    Join Date
    Dec 2003
    Location
    El Tardo
    Posts
    8,885

    Re: Plating Dirtbike/Supermoto

    Fay Myers will do a VIN verification for $20


  10. #10
    Junior Member specialk_34's Avatar
    Join Date
    Sep 2003
    Posts
    31

    Re: Plating Dirtbike/Supermoto

    Cool, thanks guys. I'll give it a shot and let you know how it goes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •