I know you need jet kits for upgrading to after market exhaust systems. But can you put one on before you get an exhaust and what will it do. I looked at dyno jet kits and they did not have any for my bike. YZF-600R . so any experianced knowledge on this would be appreciated.
You don't *need* a jet kit for an exhaust, but it helps to get the most power out of the upgrade. Also if you're going to jet the bike, wait until after you put the exhaust on, for the same reason - to get the most out of it.
You might call a place like TK Motorsports (# is on the main CSC site, under local shops) and see if they can jet it for you.
Get a Stage 1 for just an exhaust. Here's a site on Carb theory that should help you to install it correctly. Follow this and you can't go wrong.
http://www.motorcyclecarbs.com/jetting/carbs101.pdf
cal tfog wheelsports in golden their # is 303-216-2400 they shold be able to help you find what you need and will probably have some good tips for you plus they are open 7 days a week
Bryce Random racing #814
thanks for the advise i'll check these out.
A friend of mine went to TFOG for jetting and was real happy with their service.
Posting Permissions
Reply With Quote