I have a lowered sv650S (1" in the front and 3" in the back) and I have to shorten my kickstand so my bike doesn't fall over, blow over, ya know?! A couple of members brought this to my attention, not that I didn't know it already.
My question is: How shorter should the kickstand be?
Any advice would be greatly appreciated!!
I would goto the dealer and look at the angle it was leaning at stock. Then cut the kickstand so that it will sit at that angle again. Might be able to call a dealer if they are cool and bored enough to help you out by telling you over the phone.
2006 DRZ SM
2003 RIZLA GSX-R 1000 (sold)
2008 R6
There are a few options for getting the angle back correctly:
1. cut the stand and re-weld the foot pad back on (not my favorite option)
2. Bend the kickstand. This option will make the stand stick out further when it is up. not super safe.
3. you can grind the front of the stand and the stand stop, at the contact point. this makes the kickstand angle forward more when down, thus leaning the bike over further. This is my favorite option.
If you want to discuss this more, shoot me a PM. I have performed the 3 option on 2 bikes now and it has worked fine.
First rule of the internet: *bleep* you and everything you stand for. Second rule of the internet: FKZOR U AND RRYTHING U STND FR!
I'd try bending it or grinding it down a bit first. Dana took a little bit off of mind with a dremel & it leans over about 5 degrees more which definately makes me more comfortable when I walk away from it!
[SIGPIC][SIGPIC]
Buy an extra kickstand FIRST from eBay and then have it altered.
That way if you sell the SV650 later you have the option to go back to stock
\
http://cgi.ebay.com/ebaymotors/_Moto...=1218644885029
Last edited by puckstr; Wed Aug 13th, 2008 at 09:25 AM.
http://www.rapidfirebunker.com
$15 FFL TRANSFERS. $15 Private Transfers
Emergency Preparedness Store, Survival BULK Food, knives, Guns, Ammo, FREEDOM
Thanks for all your help! I have already looked at kickstands on ebay and I'm going to get one, just in case. Any other info is welcomed!
That is the route I am going too. I just won a lowering link for the CBR600RR on eBay for $25.50. Hell yeah I am cheap. Going to get an extra kick stand and shorten it before I put on the link.
Good Luck
http://www.rapidfirebunker.com
$15 FFL TRANSFERS. $15 Private Transfers
Emergency Preparedness Store, Survival BULK Food, knives, Guns, Ammo, FREEDOM
When we did this on Chris' bike it was a bit of grind/test fit/grind/test fit. It will be the same on yours. You can also install a GSX-R kickstand on your SV (it is shorter and bolts right up, depending on year)Originally Posted by MetaLord 9
First rule of the internet: *bleep* you and everything you stand for. Second rule of the internet: FKZOR U AND RRYTHING U STND FR!
Do you know exactly which year kickstand will bolt right up with a 2005 sv? And do you know if it would lower it enough? Sorry so many Q's!
Its ok to be cheap...I look for crap on ebay and craigs all the time. There are some really good deals there! Glad that Im not the only shortie around here lol!
Let me do some research on this and get back to ya
First rule of the internet: *bleep* you and everything you stand for. Second rule of the internet: FKZOR U AND RRYTHING U STND FR!
My wifes bike is lowered 2" and we bought an extra kickstand for a spare/return to stock height. We cut stand and welded the bottom back on. We have had the bike for 5 years now and never had a problem with it
the SV peeps recommend that if you do cut it, you cut out 3/4 " and then weld a rod inside the stand (it is a tube) for strength.
First rule of the internet: *bleep* you and everything you stand for. Second rule of the internet: FKZOR U AND RRYTHING U STND FR!
Just get longer legs! Short people got no reason to live! (Wasn't that a song?)
Eric in Highlands Ranch
'00 SV650 noisy lil bitch
-----
CSC Quotes worth repeating:
Is that an option?
http://www.rapidfirebunker.com
$15 FFL TRANSFERS. $15 Private Transfers
Emergency Preparedness Store, Survival BULK Food, knives, Guns, Ammo, FREEDOM
I have an adjustable gsxr kickstand I am trying to sell
If You Can't Ride It or Take it to Bed. It Ain't Worth Having!
I highly resent that!!! Trust me if I had the choice of longer legs I wouldn't choose them, the only time I wish I had longer legs is when riding.
Plus, shorter people are more innovative...
Yeah, it's called "Short People" by Randy Newman. Funny as hell. That was back in the day when it was ok to not be politically correct all the time...
When I shortened my enduro bike down to supermoto sexiness, I just cut and rewelded mine- but then again, I have a welder at the house, so it's much more of an option for me.
i lowered my wifes bike 3" i cut the foot off the kickstand then i trimmed a little off and let it set to see where it wanted it trimmed a little more until i got it right then i welded the foot back on the kickstand. worked great. i am with ninja nate on this one. plus it also looks clean.
and you did it!
the rest of us were just thinking it.
http://www.myspace.com/adrenalineaddiction24
01 zx9r
99 r6 (race bike)
Does anyone know if the kickstand and seat off a 2007 sv650S will fit a 2005? There are some for sale on ebay super cheap and I am wonderin...
Yeah that should be the same. Not much has changed between 04 and 07. I have read the stock one is extremely hard to get off (will need a breaker bar and a strong dood). Im getting ready to lower mine a bit to see if my wife can ride it. How tall are you? She is only 5" so I was going to do 3" in the rear and as much as possible up front.
Posting Permissions
Reply With Quote
