Allright Im gettin closer. Just had a few questions. I am using a stock shock in the rear and I set the sag on it. At the start I was about 1.2" and I tightened it up to be just over 3/4". I do love it and feel a huge difference in stability. However in order to get it to that measurement I am on the very last setting I have avail on this shock. It wont go any tighter. Im just wondering if this is common? Fully geared up I weigh just about 195lbs. I dont think I need to go any tighter Im just curious if this sounds right? Thoughts? Ideas? Would this indicate that I would HAVE to get a new rear shock if I weighed like 250lbs and the shock would not tighten up to an acceptable setting or am I looking at this all wrong?
On a side note I have begun the front as well. From stock settings I have taken the rebound out 4 clicks to avoid so much spring back coming off the brake. When I would come out of hard braking I felt unstable cause there was so much stap back. Now it comes back at me much smoother and more controlable. Ill be going out to the track to get the front set up just right. Any tips? How much travel should I have on a hard brake? I heard it should use almost all of the useable area with out bottoming out. That true? Any suggestions is as always appreciated. Remember: Im a suspention rookie please explain your thoughts as such.............
Thanks