Powder Coating

[chubster2003]

anybody know of a good, reasonably priced, powder coater in the firestone (highway 52 and I-25) thanks guys Clinton

[Sean]

McVahhh will post up in a minute. He's your man.

[chubster2003]

wow, now thats called service

[McVaaahhh]

http://www.cosportbikeclub.org/forum...ad.php?t=20887


Unfortunately we're on a temporary hiatus from powdercoating due to some things going down at the shop. I'm hoping to get back to it soon, but realistically it will be the end of the summer of fall before we can start coating again. As long as you're not in a big hurry I can hook you up.

--Brian

[leadbedr]

If i were to get my wheels done, would i need to bring them to you ready to go?
or can you take them off the bike at your shop?
Not looking any time soon, but want to start planning the winter project.

[sugarrey]

denver bumper and a small harley shop done west of colfax and sheridan I believe....dont know the name, but they have "powdercoating" on their signage outside, north side.

[chubster2003]

roger brian, not really looking for RIGHT NOW, but it would of been nice

let me know when your up and running again

there is a shop right down the road that does powder coating, and they wanted $150 to do some case covers, i just laughed and walked away. they said because they had to clean them and make sure they didnt get any on the inside..... re-donk-ulous

there is one more just north of me, and if i get bored i may go see how much they wanna rape me...

[Skinbabe]

There is a body shop in Longmont that can do it. Also, spec wheels in Commerce City does an awesome job and wont charge an arm and leg. Tell them Erin sent you.

[chubster2003]

well i will have to check them out, thanks Erin

[brennahm]

A guy I work with had a quad frame and subframe powdercoated by Road Runner Fabrication here in Denver. They did an awesome job and it was cheap.

[McVaaahhh]

If i were to get my wheels done, would i need to bring them to you ready to go?
or can you take them off the bike at your shop?
Not looking any time soon, but want to start planning the winter project.

Depends on how much you want to pay.

If you were to bring me your bike as is, I would have to take the wheels off and then take them somewhere to have the tires and bearings removed and then put back on. I'd have to pass all that cost on to you, plus my own time and inconvenience.

Best thing is to just bring me the wheels all ready to go and save yourself some cash.

[sprtbkbabe]

( Brian- I woulda had ya PC mine, if ya had time )


Woody's is $125/Mag wheel www.woodyswheelworks.com 303-936-0232

[McVaaahhh]

( Brian- I woulda had ya PC mine, if ya had time )


Woody's is $125/Mag wheel www.woodyswheelworks.com 303-936-0232

I'll have time, just not at the moment. I'm hoping this fall and this winter we can get some regular work going.

[UnoMOTO]

A guy I work with had a quad frame and subframe powdercoated by Road Runner Fabrication here in Denver. They did an awesome job and it was cheap.

X2 on those guys. The have done a few things for me and I was very happy with the results.

[kevplus2]

There is a body shop in Longmont that can do it.

rocky mountain. just picked up a swingarm from there tonight. they did a really nice job and the price was decent (although higher than i have seen others charge).

there is a minimum charge of $100 plus $25 for supplies though. so make sure to take in a few items if they are small to make it worth it. as an example, my swingarm was $125 and i could've included a couple small items and still paid the same price. they can also have the part prepped for you. i took mine down to steves alignment and had it media blasted for $25, but i think rocky mountain would've charged about the same.

they arent really up on m/c parts though. make sure you explain the areas you dont want coated (bearing surfaces/threads./etc). they have a decent range of colors but i just needed gloss black

[Ceez]

Mile High Polishing also does powder coat at a competitive price...let them know Cesar sent ya

http://www.milehighpolishing.com/pow...ing/4528218922

[Skinbabe]

rocky mountain. just picked up a swingarm from there tonight. they did a really nice job and the price was decent (although higher than i have seen others charge).

Yep, thats the one!