Should remedy the carb issue I had at HPR. Pretty sano for $40. Hopefully, the location will be okay for sumo. No other place I can mount it that would be more protected.
Should remedy the carb issue I had at HPR. Pretty sano for $40. Hopefully, the location will be okay for sumo. No other place I can mount it that would be more protected.
John
KTM Duke 690
Ugh. Hope you don't whack that by bottoming out, such as on a certain retaining wall jump that had a complete lack of landing. Those carb lines look awfully close to the header too.
KX65
Dizzer
929 - Yard Sale'd
THose lines are a little close fo sho. Also it may get a little beat up right there. My MSR skid plate is hammered all down the center just from shit coming off the tires. Just a thought, however I do like the thing for shizzll!
2015 R1200GS
03 & 11 XR-50 pit bike
07 & 08 DRZ 400SM
06 FJR 1300
70 SL 350
75 MT 250
2015 R1200GS
03 & 11 XR-50 pit bike
07 & 08 DRZ 400SM
06 FJR 1300
70 SL 350
75 MT 250
Everybody mounts them upside down like that. There aren't really any problems. If you lose the cap your bottle is probably so beat up the whole thing needs to be replace and you don't need the thing hermetically sealed anyway. It's a splitting hairs kind of precaution.
The bottle is for the the power-valve, drips a small bit of oil but mostly just two-smoke. The catch can has two comparments, one for all five carb vents and one for water, oil. The lines are close, but not touching.....and it runs cooler than ya'lls four-chokers.
John
KTM Duke 690
Mostly concerned about damage in that location. There was a KTM at the Performance deal that had a real nice alum can mounted between the motor and shock. I don't have that much room on my bike.
John
KTM Duke 690