thanks to Joe aka green12, my lower bearing was pressed onto the steering stem. so i came home and used a man made press to put the racer's in the neck of the frame. - they are flushbut they are not fully seated - there is maybe 1/8" for the top and bottom to be seated all the way. anyone have any thoughts on how to fix this?
Racer bearings? Do you mean the steering head bearings? Wait, I just looked it up... steering head. Well, I've had some luck at Ace hdwr, make sure you look at metric and fractional both. Don't hold your breath, keep fingers crossed. More than likely, the oem part is some wierd-assed size. I'd offer hands-on help, but I'm knee deep in my race bike right now. Good luck...
Joe
Joe
MRA #59
thanks joe. i didnt realize they had those ace hardware stores out this way. im kind of hesitant to goto a hardware store for an 0 ring for my bike. however lowes and home depot are right here.
http://motohero.net
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats. - HL Mencken
well now, i seem to have found myself in a bit of a situation. anyone have a bearing puller/punch? i dont think i can remove the bearing from the bottom of the steering stem or get a new one on it. i can manage getting the outer racers into the frame neck. if anyone can help, or wants to cacckle at me, give me a ring 347.245.7361 - PLEASE HELP
http://motohero.net
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats. - HL Mencken
thanks joe, you rule bro!
http://motohero.net
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats. - HL Mencken
update
http://motohero.net
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats. - HL Mencken
Posting Permissions
Reply With Quote