Ok,
I rode to lunch the other day and everything was fine. Come back out, throw a leg over...and I ended up realizing that my speedo/tach/fuel display, etc...would not engage when I turned the key to the start position. The weird part is that when i engage my turn signals or high beam those indicator lights will turn on but not my neutral light. The clock is still working too.
After a little browsing all i could find is that its a fuse problem. I checked my fuses and they all appear to have been in good working order. I am going to check again today to double check to make sure that i didnt miss anything as I only checked the fuse box on my left side.
Anyone have any ideas...
Please help, rookie electrician