Now its my brake lights!!!!!

[haywood jablome]

This is what i have for wires. How do i hook them up? I cant remember how i had them. HELP ME PLEASE!!!!!!

Bike Side

TURN SIGNAL
Black
Black with White Strip

TURN SIGNAL
Lime Green
Black with White Strip

RUNNING/GROUND/BREAK
White with Black Strip
Black with White Strip
Brown


TAIL LIGHTS
Black
Black with White Strip
Red



INTAGRATER
IN FROM BIKE

Green--Right Turn
Red----Break
Yellow-Left turn
Brown-Tail




OUT TO TAIL LIGHT

Green-----Right Turn/Brake
Yellow-----Left Turn/Brake
Brown-----Tail

[Hutch]

Depends on what kind of bike you have...couldn't tell from the pics and didn't see one listed on your sig. I have a list for all the different kinds of bikes. Let me know and I'll send you what I have.

[haywood jablome]

YES YES YES 2000GSXR750 remember i lead the ride Monday

[mikesf4i]

Plz tell me that you are NOT using wire nuts on your wiring!!! Wire nuts are not designed for the high vibration of life in a motorcycle. Plz solder your wires or use enviromentally sealed splices.

I installed that same integrator on my bike. But I used it to get the turn signals to come on with my brake lights.

I cannot help you with the wire colors but I could get it working with a meter if you cannot figure it out. I wire stuff on helicopters for a living. Let me know if you need help.

[Anonymous]

Soldering can be bad on automotive applications as well - I know of several land speed racers that will not use it. If you use too much it wicks up the wire and causes it to break from vibration.

[Hutch]

Typical wire colors for the GSXR...

Ground = Black/White Tracer
Brake = White/Black Tracer
Left Turn = Black
Right Turn = Light Green
Tail = Brown

Into Integrator...
Right Turn = Yellow
Brake Light = Red
Tail Light = Green
Left Turn = Orange

Out of Integrator...
Purple = Right Brake
White = Right Tail
Brown = Left Tail
Blue = Left Brake
Black = Ground

Hope this helps. If not, there is always the integrator web site...
www.integratorkit.com or www.flashalert.com

[haywood jablome]

I was using wire nuts to try to figure outht the wire combination. I use Tube connecters. Thanks for the input guys. Ill try this tonight and get back to you all. Chad

[gixxerjarhead]

chad i bet u will go through a bunch of fuses before u get it right

[haywood jablome]

And a bitch slap for Ron!!!

[haywood jablome]

So i got it all hooked back togather. My break lights are realy Dim like you can almost not see them .WTF is wrong now?

[haywood jablome]

anyone help out?

[mikesf4i]

Did you swap the wires for the brake lights and running lights?

[haywood jablome]

dont think so i tried it both ways and both ways it was the same. DAMN IT