So, Ive had this problem for a while now, and it didn't really bother me too much because my signal lights still flash, just don't flash yellow, they flash red.

Here's the problem. I have an integrated taillight on my ZX7R that I put on myself about 3 yrs ago. I had the rapid flashing problem, so I bought a Badlands Load Equalizer II and it corrected the rapid flash problem. About a year ago, my current problem started when I turn my signal lights on, the leds flash on and off red, not red and yellow like its supposed to. Now, if I disconnect one of the wires from the load equalizer (it doesn't matter was side of the signal light leads I disconnect) the one side that IS still connected flashes fine and vice versa. But, if both leads are connected, it goes back to just flashing the red on and off.

Any ideas??

Do I have a bad load equalizer?

Ive gone through and put new connectors on all of the wires. The only thing I haven't done yet (ill do that right now) is run a new ground wire to make sure that isn't the problem.