what to replace on rear break?

[Richie-Rich]

I think I compressed my rear break to hard and damaged something and am wondering what I need to replace from this parts list on my zx6r.

http://www.bikebandit.com/houseofmot...93650sch550795

Thanks.

[Slo]

What makes you think you damaged something? Meaning what are the symptoms?

[Richie-Rich]

The break dosnt work period. Theres no resistance when I push on it and I tried geting all air out of the line with the bleed valve.

[asp_125]

rear master cylinder seals are gone? If you purged the lines and it still has no resistance, the fluid is somehow getting around the master cylinder piston.

[rybo]

do you have a fluid leak that you can detect somewhere?

[Zach929rr]

BRAKE

if there is no leak, then you have air up in that business

[DemonRider]

BRAKE

if there is no leak, then you have air up in that business

you know what;;; I used to get that one wrong all the time until you corrected me a year or so ago Hahahah!!! I still have to think about it though

[CaneZach]

You can BREAK (to damage beyond repair) the BRAKES (the hydraulic mechanical system used to stop or slow a vehicle)

Check the easy stuff first. Air in the line? Rear master leaking? etc.

BTW, why are you using the rear brake so hard that you would be damaging it???

[Mother Goose]

BRAKE

if there is no leak, then you have air up in that business

This.... if it's a BREAK, you should probably replace it.

[willb003]

YEAH FUCK YOUR GRAMMER!!!!!AHHHHHHHH

[Danimal]

I would do a full fluid swap on it, bleed them normally. Then if you still have no braking I would agree with master cylinder seals. My only problem with this is that you really have to mash your rear brakes to damage them, and far beyond locking the rear wheel up. What were you doing?