Power Commander 3 help

[Str8chilin]

Hello, I just recently installed a power commander on my 05 GSXR 1000 and the Fi light is still on. It was on before but, I was told it should fix. For some reason I dont think my computer is sending the map to my PC3. Its probably something real simple that I'm over looking but if you could please help that would be great,

Thanks,
Andrew

Also I live in City park if anyone wants to meet up.

Thanks Andrew

[UglyDogRacing]

Figure out what code it's throwing and go from there.

This will help - http://www.suzuki-forums.net/index.p...d-dealer-mode/

[madvlad]

I know the K6 and K7 models had a problem with the EXUP valve getting stuck due to low voltage causing it to throw the FI light, so dk if it helps for your case.

[Str8chilin]

Its the Fi light. I't has to do with the valve that goes in the exhaust that opens and closes. The valve has been removed since after market exhaust has been installed on the bike.

Thanks,
Andrew

[madvlad]

I'm sure there has to be a way to override that, check the gixxer forums.

[UglyDogRacing]

You need to pull the black wire with brown tracer in the coupler.