So I know how to turrn it to new levels with the C-spanner and all that, but I was just looking for tips on how to get all of the weight off of the rear spring to do it. The R6 has those 2 little tabs that won't let you crank on the spring unless the wieght is off of it. I don't think a paddock stand would work for this, my idea was to either have a couple of my buddies hold the back up, or I would put a 2x4 under the subframe and lift it up onto some blocks.

Any advice would be greatly appreciated.

Spiderman, is it the same on the R1. If so, I imagine you probably adjusted yours. How did you do it?