The chain/sprocket set I got from them is top notch stuff. Sidewinder is not well known outside of the racing scene.
The chain/sprocket set I got from them is top notch stuff. Sidewinder is not well known outside of the racing scene.
John
KTM Duke 690
Ok I will give it my best shot. I found some pretty pictures that may help you understand this.
Here is how the dimensions of your chain are determined-
Sprockets are designed to match a chain's pitch, roller diameter and roller width. The sprocket measurements are the pitch diameter, outside diameter, and bottom diameter.
So this is a worn out sprocket I had laying around in the garage. Yours probably get like this too since you ride so hard.
Here I am comparing it to a new sprocket. You can clearly see the difference. The pitch diameter, outside diameter, and bottom diameter have changed due to the removal of material from wear. You are probably already familiar with all this.
Since we are all so smart here on the internet, please tell us what happens when you put a new chain on this worn out sprocket.
Jimmy Rocks.....
07 GSXR 750
07 GSXR 600 (RIP)
Don't feed the troll. He will get fat and eat your babies.
First rule of the internet: *bleep* you and everything you stand for. Second rule of the internet: FKZOR U AND RRYTHING U STND FR!
I miss my Harley, it would drip oil all the time and fling it on my chain, thus never needed to oil it!!!!
My Yamaha doesnt do that self oiling thing, so had to replace my chain and sprockets!!
Thanks for all the helpful hints on how to clean and oil my new set.
I have been riding since last June, I have almost 3000 mi on my bike, at what point should i start thinking about all this chain maintenance.
"If everything seems under control, you're just not going fast enough." - Mario Andretti
Every time the bike gets wet, (whether from riding in weather or from washing), a quick kerosene wipedown, and a re-lube, are a good idea.
Depending on how hard the 3k miles have been, you may have a lot of chain slack, or you may not have any at all. Check your slack, and if you're still within spec, you're good. If you have some excess "freeplay", make the needed adjustments. Won't take much more than 10 or 15 minutes, probably.
~Brandon~
Aprilia RSV 1000 R Factory - "Gemma"
MV Agusta F3 800 - "Amy Lou"
Rattan Fat Bear Plus - "Lynda"
(720) 935-6438
I rarely think of motorcycles without a little yearning. They are about moving, and humans, I think, yearn to move – it’s in our cells, in our desires. We quiet our babies with cyclic movement, and we quiet ourselves by going.
Melissa Holbrook Pierson
Or, let Jim ninja me.
~Brandon~
Aprilia RSV 1000 R Factory - "Gemma"
MV Agusta F3 800 - "Amy Lou"
Rattan Fat Bear Plus - "Lynda"
(720) 935-6438
I rarely think of motorcycles without a little yearning. They are about moving, and humans, I think, yearn to move – it’s in our cells, in our desires. We quiet our babies with cyclic movement, and we quiet ourselves by going.
Melissa Holbrook Pierson
THIS is why the internet is awesome!
Lube it about every 500 mi or so. Adjust as necessary.
Now, everybody get your torches & pitchforks to chase the troll back under his bridge
[SIGPIC][SIGPIC]
I will inspect this weekend, thanks for the lesson.
"If everything seems under control, you're just not going fast enough." - Mario Andretti
Motorex chain clean 611 is great stuff!!!! I use it from time to time to get all the old lube and dirt off. It is amazing how well it works. Just don't over use it.
http://www.motorexusa.com/prod_detail.asp?id=98
I play more games that Coleco!!
So with my $300 chain/sprocket set, I picked up this alignment tool. I have always suspected the alignment marks on your average swingarm to not be totally accurate...and proper alignment is critical for long chain/sprocket life. I recently used it on my dirt bike, ignoring the alignment marks, and sure enough they are not accurate and I've been running it slightly off.
The “Sidewinder Straightaway” is a very clever yet simple tool that guarantees perfect sprocket and chain alignment every time. It clamps to your sprocket face in seconds and provides an absolutely dead-on, parallel sight rod so you can bring the chain into perfect alignment by drawing on your axle adjusters. Without a reference line, your eye can never get it correct. This tool provides the reference line you need. Few riders realize that only a few degrees of mis-alignment between the chain and sprocket will cause significantly faster wear of the entire drive system and results in the loss of up to 3 horsepower. This truly is a must-have tool for anyone who owns a machine with a chain drive, power-transfer system. $39.99
John
KTM Duke 690
^^^ that's pretty tits.
Zach, did you ever get your chain cleaned and taken care of? The threads have been derailing lately and it's important that you get the info and help needed, if needed.
Yeah. I saw that cluster f**k all day today I ended up finding out that the guy I bought it from was using BelRay lube... so I'll probably go with that. Just need to borrow a garage and a rear stand from somebody. Willb003 recommended Break Kleen for cleaning so I might try that. Need to find the OEM spec chain slack tolerance too... probably in my service manual
If you need some space to work on your bike, youre more than welcome over at my place. I'll even let you use my rearstand.
All praise the Snow God, for he let's us Ride!!