Page 1 of 2 12 LastLast
Results 1 to 24 of 28

Thread: How to properly tie down a sportbike in a trailer?

  1. #1
    Senior Member WolFeYeZ's Avatar
    Join Date
    Feb 2011
    Location
    DU
    Posts
    1,761

    How to properly tie down a sportbike in a trailer?

    Found the bike, got the trailer and have the hitching gear now. Lastly I need to find out how to properly tie down a bike. Also, I would need to know how many to buy. Let me know

    Also, the last thing I am yet to buy is ties. If anyone in the Denver Metro area has some they can lend for a couple days, that would be awesome.
    MRA Expert #880 - 2015 AmateurGTO Champion, 2013 NoviceGTU Champion
    2006 YZF-R6 Race "No name" - 2005 YZF-R6 Street "Aurora"
    2015 Sponsors: Dunlop, Speedin Motorsports, STM Suspension, Silkolene Lubricants, EBC Brakes, Pit-Bull Products

    Text: (72O) 432-7236

  2. #2
    Gold Member Zach929rr's Avatar
    Join Date
    Mar 2009
    Location
    Bullying Chatfield Kids
    Posts
    5,716

    Re: How to properly tie down a sportbike in a trailer?

    You can buy a decent set of tie downs at Harbor Freight for like $20. If you don't have canyon dancers, I run the ratchet ties through the area between the forks and frame between the upper and lower triples, such that the actual strap is pulling down on the top of the bottom triple tree. I run the hook back to the mounting point on the trailer, such that both hooks are attached to the same point on the trailer.

    I also use 2 simple "pull" type straps (as opposed to the ratcheting type) to snug up the rear of the bike via the passenger pegs or other acceptable mounting point near the rear of the bike. FWIW I only use front straps with the sumo. Lastly, try to get any straps you using pulling (at least slightly) in a forward direction.
    Last edited by Zach929rr; Wed Apr 27th, 2011 at 05:39 PM.
    KX65
    Dizzer
    929 - Yard Sale'd

  3. #3
    Member SloBlue's Avatar
    Join Date
    Aug 2008
    Location
    Berthoud, CO
    Posts
    219

    Re: How to properly tie down a sportbike in a trailer?

    I got a Canyon Dancer Bar Harness. Clerks at moto shops told me they didn't like them and talked me out of it for a while, but I'm really glad I picked one up. I use it a lot - down to Faster Motorsports for service, out to Cali for Moto GP. I love it. Excellent way to spend $30.
    Illegitimi non carborundum

    '03 Honda vtr1000f Super Hawk
    '07 Honda XR650L

  4. #4
    Senior Member Captain Obvious's Avatar
    Join Date
    Jun 2008
    Location
    Garden of the Gods
    Posts
    1,574

    Re: How to properly tie down a sportbike in a trailer?

    9 out of 10 times, canyon dancers are the best. Occasionally when your tie down points are high (sidewalls of a pickup) the dancer makes life difficult. Def worth the price to have one per bike.

    I have 20 or so tie downs, but I use them for all sorts of stuff other than motorcycles. Have been collecting for years.

    For around own easy driving, sometimes I only tie the front down. Road trips or any trip longer than a 10 minute run, I use tiedowns on each corner.

    Tighten the fronts first, tighten them down so you compress the forks just a touch, and then give it another tug. You don't have to torque them do much your suspense bottoms out. I don't like to leave them compressed if the bike sits over night when loaded. You want the tie down ends to be out to the sides as mich as you can, NOT straight down from the handle bars if able. Tie the back to any metal part that is hard rearsets etc. Keep in mind the straps will move a bit when driving, so protect paint from the straps else you will rib through your paintjob.

    Oh, and when you get tiedowns, the more hook the better, not all tie downs are equal. The more hook on the metal ends the less likely they are to jump off while driving.

    Once set, take the look straps and tie them up so they don't flap around. I usually give 1 knot right at the ratchet mechanism in the event it lets go, will lock itself during release if an oopsie happens.
    The closest thing to immortality on this earth is a Federal government program - RR

  5. #5
    Senior Member WolFeYeZ's Avatar
    Join Date
    Feb 2011
    Location
    DU
    Posts
    1,761

    Re: How to properly tie down a sportbike in a trailer?

    Perfect, Thank you guys Still looking for straps, but can always buy those at Uhaul really.

    Also thanks to Vellos for sending me a nice video that even used the trailer that I will have to use.
    http://www.youtube.com/watch?v=sJnXtP_3jLI
    MRA Expert #880 - 2015 AmateurGTO Champion, 2013 NoviceGTU Champion
    2006 YZF-R6 Race "No name" - 2005 YZF-R6 Street "Aurora"
    2015 Sponsors: Dunlop, Speedin Motorsports, STM Suspension, Silkolene Lubricants, EBC Brakes, Pit-Bull Products

    Text: (72O) 432-7236

  6. #6
    Senior Member Sarge's Avatar
    Join Date
    Sep 2010
    Location
    Fort Carson
    Posts
    1,270

    Re: How to properly tie down a sportbike in a trailer?

    I've got four straps and a set of canyon dancers if you want to come to the Springs to pick them up. I'll even give you a quick tie-down lesson if you want.

    I have to say though, I think I paid maybe $40-$50 for everything, might be worth investing in a set of your own.
    '12 BMW S 1000 RR
    '11 Suzuki V-Strom DL-650 *SOLD*
    '07 Aprilia RSV R Factory *SOLD*

  7. #7
    Senior Member jbnwc's Avatar
    Join Date
    Jan 2005
    Location
    Parker
    Posts
    1,170

    Re: How to properly tie down a sportbike in a trailer?

    I like the Canyon Dancers, but you gotta be careful with them. I wrecked my wife's Convertibars when I used the new plastic cup style CDancer. - They can put a lot of torque on the ends of your bars.
    www.cocsba.com


    '00 ZX12R
    '03 SV1000

  8. #8
    Senior Member Airreed's Avatar
    Join Date
    Sep 2002
    Location
    Centennial, CO
    Posts
    1,011

    Re: How to properly tie down a sportbike in a trailer?

    I have a Canyon Dancer you can borrow along with numerous straps.
    Shoot me a PM if you want to borrow them.
    I'm located in SE Aurora/Centennial area and work near I-70/I-25.

    Jason
    2011 Ducati 848 Evo "Bautista"
    2002 Honda RC-51 "Big Boi"

    "Always remember to pillage BEFORE you burn!"

  9. #9
    Senior Member CaneZach's Avatar
    Join Date
    Jan 2009
    Location
    Down in the dirty dirty
    Posts
    1,802

    Re: How to properly tie down a sportbike in a trailer?

    Pit Bull trailer restraint system FTW

  10. #10
    Gold Member Bueller's Avatar
    Join Date
    Dec 2003
    Location
    El Tardo
    Posts
    8,885

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by CaneZach View Post
    Pit Bull trailer restraint system FTW
    Price tag will choke a horse, I'll just stay old fashioned.

    Soft straps are your friend.


  11. #11
    Senior Member FZRguy's Avatar
    Join Date
    Feb 2003
    Location
    Lakewood
    Posts
    4,476

    Re: How to properly tie down a sportbike in a trailer?

    I have soft straps and some spare tie downs that you are welcome to use. Don't care for the Canyon Dancer myself.
    Last edited by FZRguy; Thu Apr 28th, 2011 at 09:55 PM.
    John
    KTM Duke 690

  12. #12
    Senior Member TinkerinWstuff's Avatar
    Join Date
    Sep 2010
    Location
    Windsor
    Posts
    3,017

    Re: How to properly tie down a sportbike in a trailer?

    Don't use rear grab handles as a tie down point
    1998 VFR800 Interceptor - resurrected and custom tail http://vfrworld.com/forums/5th-gener...98-vfr800.html

    1999 DR650SE

  13. #13
    Senior Member brennahm's Avatar
    Join Date
    Mar 2009
    Location
    City Park
    Posts
    2,178

    Re: How to properly tie down a sportbike in a trailer?

    If you're going to tie down the rear, try understanding why you're doing so.

    The goal is to keep the bike straight (to prevent odd torquing and tucking the front tire which will lay the bike down) and to keep it from bouncing too much (really not an issue if the front is tied down properly.

    The easiest way I've found to do it is just loop the strap around the rim and tire and hook to the sides of the trailer. Keeps the bike straight, won't bend anything, easy to do.

  14. #14
    Senior Member WolFeYeZ's Avatar
    Join Date
    Feb 2011
    Location
    DU
    Posts
    1,761

    Re: How to properly tie down a sportbike in a trailer?

    Got some tie downs arranged now. Thanks everyone
    MRA Expert #880 - 2015 AmateurGTO Champion, 2013 NoviceGTU Champion
    2006 YZF-R6 Race "No name" - 2005 YZF-R6 Street "Aurora"
    2015 Sponsors: Dunlop, Speedin Motorsports, STM Suspension, Silkolene Lubricants, EBC Brakes, Pit-Bull Products

    Text: (72O) 432-7236

  15. #15
    Board Newbie
    Join Date
    Apr 2011
    Posts
    5

    Re: How to properly tie down a sportbike in a trailer?

    I had a Canyon Dancer rig and it destroyed my grips. I just use simple tie down rings around the triple clamp then ratchet straps hooked to them.

    Here's my setup:

    The pics make it appear that the tie down rings are pushing on the fairings, but in reality they are barely touching them. The front straps arent very tight at all, the wheel chock is doing most of the work while the straps just help it from swaying.







    Last edited by Shodown; Wed Apr 27th, 2011 at 11:33 PM.

  16. #16
    Senior Member Captain Obvious's Avatar
    Join Date
    Jun 2008
    Location
    Garden of the Gods
    Posts
    1,574

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by Bueller View Post
    Price tag will choke a horse, I'll just stay old fashioned.
    Yeah, not all of us are loaded.

    I do have one of these for my open trailer, it helps when loading etc but straps are still needed.
    The closest thing to immortality on this earth is a Federal government program - RR

  17. #17
    Member 675Rider's Avatar
    Join Date
    Nov 2008
    Location
    Fountain
    Posts
    339

    Re: How to properly tie down a sportbike in a trailer?

    I use a Bike Grab chock then put soft straps around the lower fork thru the caliper and ratchet strap it a little forward and to the side. Just tight enough to keep the tire in there good. This keeps the stress off your suspension. The bike grap holds the bike up while I strap the front down, so i can do it all easily by myself.

    The rear I use soft straps around the rear sub frame near the passenger pegs, then ratchet strap it more forward to keep the bike firmly in the chock. This only compresses the suspension a little.

    I also put 1x1 wood boards on each side of my rear to keep it from moving any.

    This set up has worked great for me and lets the suspension absorb the bumps instead of having to compress the crap out of it. I can shake the shit out of the bike and trailer and it doesnt budge. Ive traveled cross country and several track days this way. I too dont care for canyon dancers, rough on your bars and grips.
    2006 Triumph Daytona 675-Track Only For Me!

  18. #18
    Senior Member CaneZach's Avatar
    Join Date
    Jan 2009
    Location
    Down in the dirty dirty
    Posts
    1,802

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by Bueller View Post
    Price tag will choke a horse, I'll just stay old fashioned.

    Soft straps are your friend.
    Quote Originally Posted by Captain Obvious View Post
    Yeah, not all of us are loaded.

    I do have one of these for my open trailer, it helps when loading etc but straps are still needed.
    Gentlemen, let's not make it sound like the Pit Bull system costs more than the trailer itself. I realize this is the internet, where fits of hyperbole are the norm, but I picked mine up for $250. Is it more expensive than tie-downs and ratchet straps? Absolutely! Do I load my bike by myself in about thirty seconds? Again, absolutely. Do I run the risk of the blowing a fork seal? Nope.

  19. #19
    Gold Member Bueller's Avatar
    Join Date
    Dec 2003
    Location
    El Tardo
    Posts
    8,885

    Re: How to properly tie down a sportbike in a trailer?

    $225 more than I am willing to pay for something I have been doing for 35+ years and have never blown a seal yet. And the only time anyone has ever helped me load a bike was when I crashed at Pueblo and needed a hand getting a fuckered up bike into the back of my pickup with a fuckered up arm.

    Seriously those are nice but just not worth it to me.


  20. #20
    Business in the front, party in the back! CYCLE_MONKEY's Avatar
    Join Date
    Sep 2003
    Location
    The white section of Aurora (Tallyn's Reach)
    Posts
    9,331

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by Shodown View Post
    I had a Canyon Dancer rig and it destroyed my grips. I just use simple tie down rings around the triple clamp then ratchet straps hooked to them.

    Here's my setup:

    The pics make it appear that the tie down rings are pushing on the fairings, but in reality they are barely touching them. The front straps arent very tight at all, the wheel chock is doing most of the work while the straps just help it from swaying.
    @Shodown: I like the front wheel chock, I made a wooden platform with one with some tiedown rings on it in case the covered trailer I used (i.e. U-Haul) didn't have any rings. A couple comments though, it may look like the straps are barely touching the fairings, but they can still damage or break them, especially if as you mentioned the straps aren't tight as the bike is going to move around more. I've seen a LOT of broken fairings from tying it down like that, and, I use a canyon dancer and have never had any damage at all. Also, I'd put the rear tiedown straps around the bottom of the subframe rails, instead of the weaker cast rear footpeg brackets. Just my .02.......

    BTW, I like the Pit-Bull system, but would rather it lock on the front wheel as it'd make it a lot easier to use I think.
    Last edited by CYCLE_MONKEY; Thu Apr 28th, 2011 at 09:15 AM.
    --------------------------------------------------
    "...There can be no divided allegiance here. Any man who says he is an American, but something else also, isn't an American at all. We have room for but one flag, the American flag. We have room for but one language here, and that is the English language...and we have room for but one sole loyalty and that is a loyalty to the American people."

    -Theodore Roosevelt 1907
    --------------------------------------------------
    Blu/Wht '01 Gixxer 1K, '91 KX500
    --------------------------------------------------
    Tokin' SortaTalian
    (Pronounced: Kind-A-Dago)

  21. #21
    Gold Member Zach929rr's Avatar
    Join Date
    Mar 2009
    Location
    Bullying Chatfield Kids
    Posts
    5,716

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by Bueller View Post
    $225 more than I am willing to pay for something I have been doing for 35+ years and have never blown a seal yet. And the only time anyone has ever helped me load a bike was when I crashed at Pueblo and needed a hand getting a fuckered up bike into the back of my pickup with a fuckered up arm.

    Seriously those are nice but just not worth it to me.

    HEY! Let money bags over there spend his money how he pleases.
    KX65
    Dizzer
    929 - Yard Sale'd

  22. #22
    Senior Member sprtbkbabe's Avatar
    Join Date
    Nov 2003
    Location
    Setting off car alarms
    Posts
    2,238

    Re: How to properly tie down a sportbike in a trailer?

    Two ways I load a bike by myself:

    1 - get a locking sportchock
    2 - have a Cycle Cynch ready (Canyon dancers are the Sux IMHO)

    The tie downs will act as support if the chock is either bolted in or in a secure position
    Last edited by sprtbkbabe; Thu Apr 28th, 2011 at 11:47 AM.
    "Every Crotch is a Rocket" HDAVE

    '09 Suzuki SV650
    '07 Honda CBR 600RR
    '14 1875 watt Conair

    MRA#522


  23. #23
    Business in the front, party in the back! CYCLE_MONKEY's Avatar
    Join Date
    Sep 2003
    Location
    The white section of Aurora (Tallyn's Reach)
    Posts
    9,331

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by sprtbkbabe View Post
    Two ways I load a bike by myself:

    1 - get a locking sportchock
    2 - have a Cycle Cynch ready (Canyon dancers are the Sux IMHO)

    The tie downs will act as support if the chock is either bolted in or in a secure position
    I like that chock better than the cheaper one I have (in the link in a previous post), and would like to get it if I have to trailer my bike more.
    --------------------------------------------------
    "...There can be no divided allegiance here. Any man who says he is an American, but something else also, isn't an American at all. We have room for but one flag, the American flag. We have room for but one language here, and that is the English language...and we have room for but one sole loyalty and that is a loyalty to the American people."

    -Theodore Roosevelt 1907
    --------------------------------------------------
    Blu/Wht '01 Gixxer 1K, '91 KX500
    --------------------------------------------------
    Tokin' SortaTalian
    (Pronounced: Kind-A-Dago)

  24. #24
    Senior Member sprtbkbabe's Avatar
    Join Date
    Nov 2003
    Location
    Setting off car alarms
    Posts
    2,238

    Re: How to properly tie down a sportbike in a trailer?

    Quote Originally Posted by CYCLE_MONKEY View Post
    I like that chock better than the cheaper one I have (in the link in a previous post), and would like to get it if I have to trailer my bike more.
    Baxley has an actual trailer one that can be permanently bolted in.

    But, I like the removable sportchock, as seen here, for the convenience of when the racebike, without its side stand, can get rolled up after coming off of the track and I can't get the pitbull stand in place behind the bike.
    "Every Crotch is a Rocket" HDAVE

    '09 Suzuki SV650
    '07 Honda CBR 600RR
    '14 1875 watt Conair

    MRA#522


Similar Threads

  1. Stolen Trailer and Dirt bikes
    By tarbash29 in forum Stolen Bikes
    Replies: 33
    Last Post: Sat Jul 4th, 2009, 12:49 PM
  2. Want to borrow trailer for R2SL next week...
    By jbnwc in forum Non-Bike Discussion
    Replies: 2
    Last Post: Tue Jun 23rd, 2009, 02:38 PM
  3. boat trailer 2 bike trailer
    By daemon in forum Gear & Accessories
    Replies: 19
    Last Post: Thu Oct 2nd, 2008, 12:06 AM
  4. Blue Ridge Speeders
    By tarded400 in forum Pics and Videos
    Replies: 12
    Last Post: Tue Mar 4th, 2008, 02:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •