Anyone know of a good shop to work on a old vintage motorcrosser (1976) need some fork seals installed and this was the Yzx model that had the big canister air fork tubes.
Anyone know of a good shop to work on a old vintage motorcrosser (1976) need some fork seals installed and this was the Yzx model that had the big canister air fork tubes.
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Mark's Motorcycle in Englewood (next door to 303Cycle) works on old school bikes.
John
KTM Duke 690
Epic has the ability. Call to see if they're interested.
I would call epic first but if they can't help. I met some guys from vintage motoworx at the performance cycle bike night. They had some nice bikes there but I've never worked with them, so I don't know the pricing or how quick their turn around is. From what I saw they seem to do good work.
A good long ride can clear your mind, restore your faith and use up a lot of fuel.
A good rider has balance, judgment, and good timing. So does a good lover.
Also Jim at TFOG is real close to you.
2015 R1200GS
03 & 11 XR-50 pit bike
07 & 08 DRZ 400SM
06 FJR 1300
70 SL 350
75 MT 250
Thanks,
I'll give Marks a shot, heard alot of good things about them
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Try Jim Bennett at Racers Edge in Lakewood.He only works on dirtbikes, has a full machine shop and dyno. He's just finishing a restoration of '76 RM125 and it's impeccable. 3039862107
Thanks for the tips. Is this a new shop?Originally Posted by UglyDogRacing
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Nope he's been around for years. He primarily works on dirtbikes but will do streetbike work.
Yes, Jim is awesome. Better hit him up now b/c he gets real busy in the spring.
John
KTM Duke 690
Posting Permissions
Reply With Quote
