Getting closer to making that 8 second 1/4 mile pass 1/10 at a time. After some more Dyno tuning by Quik Cyles got a 9.3 pass at Bandimere yesterday. Not sure if I'll be able to get a 8 second pass this year but will come close.
[/URL]
Getting closer to making that 8 second 1/4 mile pass 1/10 at a time. After some more Dyno tuning by Quik Cyles got a 9.3 pass at Bandimere yesterday. Not sure if I'll be able to get a 8 second pass this year but will come close.
[/URL]
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Congratulations on the time improvement, but I have to comment on that slip. Talk about a mismatch, I am assuming either he knew he redlighted and shut down or he broke.?
Did you race on Wednesday also? I was in my crossfireSRT6 you had the same #B813 I was car 35 you shot me down fast. 9.573@148.58mph I had 13.495@105.76 If that was you. you had some good runs. makes me want to run my 1200 bandit. started looking for some full leathers, just to try it.
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Will try to make it, my helmet is to old. according to them. It's in great shape, but will try and find a newer one.
Thanks and just FYI this was just during test n tune so they line up anyone regardless of speed. As far as a mismatch, the same night, I was lined up against a old nitro front engine dragster, I just figured no big deal as he will take off and be so far ahead of me, I wont have to worry about it. Some of my buddies on bikes sat on the side lines snickering, ( that should have given me a clue) Well he had some problem on the starting line and about half way down the track I could here him coming and letting on and off the throttle so I knew he was either spinning the tires or getting sideways which scared the bajeebers out of me and than he finally went by me literally almost blowing me off the track...........................ahhhhhh, so much fun.
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
damn youre brave haha. i wouldnt line up against rwd drag cars with stupid amounts of power even in a car haha
~Scott #119
At PMP they won't let cars and bikes line up together. It's a good rule, but leads to an extra run or two every now and again.
And Closer yet to that ever elusive 8 second pass.
[/URL]
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
What are you tweaking at this point to bring up the power? What is your current limiting factor? Traction, boost, fuel?
We're adjusting fuel/air mixture and running higher octane race gas but the limiting factors are the head bolts and head gaskets right now. The stock head bolts can only take 37lbs of torqueing them down and that tends to get the head gasket to leak. So will have to get bigger head bolts.
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles
Well didnt do worth a crap at the races last night but finally broke 150 mph and ran a 9.1. My friend Ted Alegria ran a 8.3 at 167 mph on his Turbo Busa.
[/URL]
In Memory of my Pal Ike. Riding in the wind will never be the same without you!
Chunky Beast Racing
01 Turbo Busa#B813 8.6 @170.98 mph Bandimere
Semi finalist Street Bike ET 2017 Bandimere
1st Place Coys Street Machine ShowDown 2015
1st Place Dragster Challenge 2013 Julesburg, CO
1st Place Dragster Challenge 2012 Julesburg, COl
1st Place Friday Night Drags 2011 Pueblo, CO
1st Place Dragster Challenge 2011 Pueblo, CO
2017 SPONSORS
A.P.E American Performance Engineering
Diversity Cycles