anybody know of a good, reasonably priced, powder coater in the firestone (highway 52 and I-25) thanks guys Clinton
anybody know of a good, reasonably priced, powder coater in the firestone (highway 52 and I-25) thanks guys Clinton
2006 CBR 600rr Orange/Black
McVahhh will post up in a minute. He's your man.
wow, now thats called service
2006 CBR 600rr Orange/Black
http://www.cosportbikeclub.org/forum...ad.php?t=20887
Unfortunately we're on a temporary hiatus from powdercoating due to some things going down at the shop. I'm hoping to get back to it soon, but realistically it will be the end of the summer of fall before we can start coating again. As long as you're not in a big hurry I can hook you up.
--Brian
'02 RC-51 - Street
'05 Pitster Pro 125 - Pitbike madness
Be polite. Be professional. But be prepared to kill everyone you meet.
"Motorcycles tell us a more useful truth: we are small and exposed, and probably moving too fast for our own good, but that's no reason not to enjoy every minute of the ride."
~Dave Karlotski
If i were to get my wheels done, would i need to bring them to you ready to go?
or can you take them off the bike at your shop?
Not looking any time soon, but want to start planning the winter project.
denver bumper and a small harley shop done west of colfax and sheridan I believe....dont know the name, but they have "powdercoating" on their signage outside, north side.
roger brian, not really looking for RIGHT NOW, but it would of been nice
let me know when your up and running again
there is a shop right down the road that does powder coating, and they wanted $150 to do some case covers, i just laughed and walked away. they said because they had to clean them and make sure they didnt get any on the inside..... re-donk-ulous
there is one more just north of me, and if i get bored i may go see how much they wanna rape me...
Last edited by chubster2003; Wed Jun 17th, 2009 at 02:51 PM.
2006 CBR 600rr Orange/Black
There is a body shop in Longmont that can do it. Also, spec wheels in Commerce City does an awesome job and wont charge an arm and leg. Tell them Erin sent you.
Whatever jack ass.
well i will have to check them out, thanks Erin
2006 CBR 600rr Orange/Black
A guy I work with had a quad frame and subframe powdercoated by Road Runner Fabrication here in Denver. They did an awesome job and it was cheap.
Depends on how much you want to pay.
If you were to bring me your bike as is, I would have to take the wheels off and then take them somewhere to have the tires and bearings removed and then put back on. I'd have to pass all that cost on to you, plus my own time and inconvenience.
Best thing is to just bring me the wheels all ready to go and save yourself some cash.
Last edited by McVaaahhh; Wed Jun 17th, 2009 at 03:49 PM.
'02 RC-51 - Street
'05 Pitster Pro 125 - Pitbike madness
Be polite. Be professional. But be prepared to kill everyone you meet.
"Motorcycles tell us a more useful truth: we are small and exposed, and probably moving too fast for our own good, but that's no reason not to enjoy every minute of the ride."
~Dave Karlotski
( Brian- I woulda had ya PC mine, if ya had time )
Woody's is $125/Mag wheel www.woodyswheelworks.com 303-936-0232
"Every Crotch is a Rocket" HDAVE
'09 Suzuki SV650
'07 Honda CBR 600RR
'14 1875 watt Conair
MRA#522
'02 RC-51 - Street
'05 Pitster Pro 125 - Pitbike madness
Be polite. Be professional. But be prepared to kill everyone you meet.
"Motorcycles tell us a more useful truth: we are small and exposed, and probably moving too fast for our own good, but that's no reason not to enjoy every minute of the ride."
~Dave Karlotski
rocky mountain. just picked up a swingarm from there tonight. they did a really nice job and the price was decent (although higher than i have seen others charge).
there is a minimum charge of $100 plus $25 for supplies though. so make sure to take in a few items if they are small to make it worth it. as an example, my swingarm was $125 and i could've included a couple small items and still paid the same price. they can also have the part prepped for you. i took mine down to steves alignment and had it media blasted for $25, but i think rocky mountain would've charged about the same.
they arent really up on m/c parts though. make sure you explain the areas you dont want coated (bearing surfaces/threads./etc). they have a decent range of colors but i just needed gloss black
2000 tillis plus stuff with some polished stuff and some carbon fiber stuff and a little bit of tlr stuff and some gsxr stuff
Mile High Polishing also does powder coat at a competitive price...let them know Cesar sent ya
http://www.milehighpolishing.com/pow...ing/4528218922
For My Diavan