Results 1 to 19 of 19

Thread: Shifter Pedal got bent today.

  1. #1

    Shifter Pedal got bent today.

    So I lowsided the CBR earlier today literally minutes after washing it, tires were pretty wet and the bike just got away from me going around a corner on the way back to the house. Nothing got messed up that bad except the shifter, it's bent a pretty good ways out of stock shape. I can still shift the bike just fine, I do have to kind of kick it down to get it into a lower gear though. Should I try bending it back or just straight up replace it? I'll have pics up in the next day or so, whenever I feel like going down to look at it again.

  2. #2
    Say what again... Site Admin rforsythe's Avatar
    Join Date
    Sep 2002
    Location
    On the brink
    Posts
    8,013

    Re: Shifter Pedal got bent today.

    You can try bending it back but usually the metal is pretty crappy on those, so it may just straight up break on you one day. I'd replace it if it's bent bad.
    Asshole Nazi devil moderator out to get each and every one of you

    Nothing in all the world is more dangerous
    than sincere ignorance
    and conscientious stupidity.
    - Martin Luther King, Jr.


    disce quasi semper victurus vive quasi cras moriturus

    The return of MRA #321! Sponsored by Western Ambulance, Chicane Trackdays, and a very patient wife...

  3. #3

    Re: Shifter Pedal got bent today.

    It just got bent inwards a little bit, doesn't look major but I think you're right about replacing it rather than waiting for it to break on me in traffic.

  4. #4
    Senior Member PhL0aTeR's Avatar
    Join Date
    Aug 2005
    Location
    On the line
    Posts
    1,922

    Re: Shifter Pedal got bent today.

    I would definitely replace it, but keep the bent one as a spare after you bend it back, if you go on a long ride and pack a bag toss it in, you never know when you might need it, could be what gets ya home


    06 DR650SE


  5. #5

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by PhL0aTeR View Post
    I would definitely replace it, but keep the bent one as a spare after you bend it back, if you go on a long ride and pack a bag toss it in, you never know when you might need it, could be what gets ya home
    Great idea, thanks for the tip!

  6. #6
    Senior Member Repsol a095's Avatar
    Join Date
    Sep 2006
    Location
    Aurora, Colorado
    Posts
    1,237

    Re: Shifter Pedal got bent today.

    Hey bro,

    If you need any help, let me know. If you are up for riding tomorrow, the noob ride will be leaving from Morrison Conoco at about nine-thirty. Let me know if you want to ride down together; I am going to leave at about eight-fifteen.
    Patrick

  7. #7

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by Repsol a095 View Post
    Hey bro,

    If you need any help, let me know. If you are up for riding tomorrow, the noob ride will be leaving from Morrison Conoco at about nine-thirty. Let me know if you want to ride down together; I am going to leave at about eight-fifteen.
    Patrick
    You know, I think I might just suck it up and tag along. I'll hit ya up tomorrow morning.

  8. #8
    Senior Member Aracheon's Avatar
    Join Date
    Oct 2006
    Location
    North Denver...ish
    Posts
    3,315

    Re: Shifter Pedal got bent today.

    That aluminum will bend once. Trying to bend it back will snap it off... and that's a $65 mistake. (Believe me... I know.)
    Chris

    Quote Originally Posted by ~Barn~ View Post
    There's nothing that will ever replace the warm feeling of a perfectly blipped 6th-to-4th downshift, that drops right lane traffic like 1st first semester chem-lab.

  9. #9
    Senior Member mayhem's Avatar
    Join Date
    Aug 2007
    Location
    SoCo
    Posts
    749

    Re: Shifter Pedal got bent today.

    if your gonna try and bend it back, put it in a vise and hit it with a torch and slowly try to bend it back.......
    drop a gear and disappear....


    Asshat Racing:Mra #228
    2002 r6 street,akrapovic slip-on,flush mounts,Ohlins steering dampener
    2000 r6 race (sold)
    ________________________________________
    sponsors: www.ApexSportsInc.com ,Bashed Bikes, www.Matefactor.com , www.PikesPerkcafe.com, www.TribalTrading.com ,Jdh Welding, www.Asshatracing.com
    http://s238.photobucket.com/albums/ff196/mayhemcs/

  10. #10
    Senior Member Aracheon's Avatar
    Join Date
    Oct 2006
    Location
    North Denver...ish
    Posts
    3,315

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by mayhem View Post
    if your gonna try and bend it back, put it in a vise and hit it with a torch and slowly try to bend it back.......
    Good thought! I only ended up using a vice and a couple blocks of wood... completely forgot about heating it up.
    Chris

    Quote Originally Posted by ~Barn~ View Post
    There's nothing that will ever replace the warm feeling of a perfectly blipped 6th-to-4th downshift, that drops right lane traffic like 1st first semester chem-lab.

  11. #11
    Senior Member mayhem's Avatar
    Join Date
    Aug 2007
    Location
    SoCo
    Posts
    749

    Re: Shifter Pedal got bent today.

    and if that doesn't work. go to aracheons house and take the one off his bike, he wont mind.......

    chris, you goin to hastings?
    drop a gear and disappear....


    Asshat Racing:Mra #228
    2002 r6 street,akrapovic slip-on,flush mounts,Ohlins steering dampener
    2000 r6 race (sold)
    ________________________________________
    sponsors: www.ApexSportsInc.com ,Bashed Bikes, www.Matefactor.com , www.PikesPerkcafe.com, www.TribalTrading.com ,Jdh Welding, www.Asshatracing.com
    http://s238.photobucket.com/albums/ff196/mayhemcs/

  12. #12

    Re: Shifter Pedal got bent today.

    lol I don't think I'd be able to make it all the way down there today, it hurts bad enough just moving around my apartment. For $65 I'll just replace it and keep the bent spare around just in case. Thanks for the info!

  13. #13
    Senior Member Aracheon's Avatar
    Join Date
    Oct 2006
    Location
    North Denver...ish
    Posts
    3,315

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by mayhem View Post
    and if that doesn't work. go to aracheons house and take the one off his bike, he wont mind.......

    chris, you goin to hastings?




    We'll be leaving Friday morning around 0500. Just finished my safety wiring today (bits that I had forgotten about), and I'll have my second set of plastics painted and ready to go hopefully by no later than Wednesday.
    Chris

    Quote Originally Posted by ~Barn~ View Post
    There's nothing that will ever replace the warm feeling of a perfectly blipped 6th-to-4th downshift, that drops right lane traffic like 1st first semester chem-lab.

  14. #14
    Senior Member mayhem's Avatar
    Join Date
    Aug 2007
    Location
    SoCo
    Posts
    749

    Re: Shifter Pedal got bent today.

    0500? damn, wanna get there early dont ya...are you doin the afternoon trackday? i keep checkin the weather for hastings and its all over the place, right now sat:80 isolated t-storms 50% chance rain. sun:82 20% chance rain...i dont have any rain tires, so i guess i should start lookin..we'll see what the weather says on thurs........
    drop a gear and disappear....


    Asshat Racing:Mra #228
    2002 r6 street,akrapovic slip-on,flush mounts,Ohlins steering dampener
    2000 r6 race (sold)
    ________________________________________
    sponsors: www.ApexSportsInc.com ,Bashed Bikes, www.Matefactor.com , www.PikesPerkcafe.com, www.TribalTrading.com ,Jdh Welding, www.Asshatracing.com
    http://s238.photobucket.com/albums/ff196/mayhemcs/

  15. #15
    Senior Member Aracheon's Avatar
    Join Date
    Oct 2006
    Location
    North Denver...ish
    Posts
    3,315

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by mayhem View Post
    0500? damn, wanna get there early dont ya...are you doin the afternoon trackday? i keep checkin the weather for hastings and its all over the place, right now sat:80 isolated t-storms 50% chance rain. sun:82 20% chance rain...i dont have any rain tires, so i guess i should start lookin..we'll see what the weather says on thurs........
    Yeah, we're aiming to leave early to accommodate for gas/piss stops, as well as for any emergencies. We'd like to have plenty of time to get our pit area set up and get familiar with the surroundings. We'll be running the Friday afternoon practice for sure.

    The weather forecast has me a little worried. I don't have rain tires either, so it'll be an interesting weekend if it gets wet...
    Chris

    Quote Originally Posted by ~Barn~ View Post
    There's nothing that will ever replace the warm feeling of a perfectly blipped 6th-to-4th downshift, that drops right lane traffic like 1st first semester chem-lab.

  16. #16
    Senior Member mayhem's Avatar
    Join Date
    Aug 2007
    Location
    SoCo
    Posts
    749

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by Aracheon View Post
    Yeah, we're aiming to leave early to accommodate for gas/piss stops, as well as for any emergencies. We'd like to have plenty of time to get our pit area set up and get familiar with the surroundings. We'll be running the Friday afternoon practice for sure.

    The weather forecast has me a little worried. I don't have rain tires either, so it'll be an interesting weekend if it gets wet...
    yeah, and its just getting worse....calling for rain and thunderstorms from wed to wed.....sat looks the worst 78degrees thunderstorms and 50% chance of rain... if it stays like that i'm not goin, i'll get my jones out on memorial day at pmp...........praying it gets better............

    different websites say different forecasts....www.wunderground.com says 83 sat 20% chance rain and about the same sun.....i like that alot better than weather.com lol
    Last edited by mayhem; Tue May 20th, 2008 at 08:48 AM.
    drop a gear and disappear....


    Asshat Racing:Mra #228
    2002 r6 street,akrapovic slip-on,flush mounts,Ohlins steering dampener
    2000 r6 race (sold)
    ________________________________________
    sponsors: www.ApexSportsInc.com ,Bashed Bikes, www.Matefactor.com , www.PikesPerkcafe.com, www.TribalTrading.com ,Jdh Welding, www.Asshatracing.com
    http://s238.photobucket.com/albums/ff196/mayhemcs/

  17. #17
    Senior Member dragos13's Avatar
    Join Date
    Nov 2006
    Location
    Littleton
    Posts
    1,385

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by Aracheon View Post
    Yeah, we're aiming to leave early to accommodate for gas/piss stops, as well as for any emergencies. We'd like to have plenty of time to get our pit area set up and get familiar with the surroundings. We'll be running the Friday afternoon practice for sure.

    The weather forecast has me a little worried. I don't have rain tires either, so it'll be an interesting weekend if it gets wet...
    Thats good thinking to have plenty of time for emergencies, setting up, etc. The trackday starts at 3pm. We are going to ask George if we can take the pit bikes around the track for a couple laps. Come find the Young Blood pits and I'm sure you can roll out with us. Its a great way to see the track before actually hitting it on the race bikes.

    Dont worry about the weather too much. If you are in the points for a championship, then you better have rain tires. The main thing is just ride within your limit. Its wet for everyone, and everyone will slow it down when its raining.

    Last year, we had slight rain on Saturday morning, just enough to leave puddles on the track. It was pretty wet for that practice, then dried up nice. Just went out on DOT's and took the practice slow.

    And back on topic, just bang the shifter back into shape and start hitting up eBay. What year is your bike? Stock rearsets?
    Casey D

  18. #18

    Re: Shifter Pedal got bent today.

    Quote Originally Posted by dragos13 View Post
    Thats good thinking to have plenty of time for emergencies, setting up, etc. The trackday starts at 3pm. We are going to ask George if we can take the pit bikes around the track for a couple laps. Come find the Young Blood pits and I'm sure you can roll out with us. Its a great way to see the track before actually hitting it on the race bikes.

    Dont worry about the weather too much. If you are in the points for a championship, then you better have rain tires. The main thing is just ride within your limit. Its wet for everyone, and everyone will slow it down when its raining.

    Last year, we had slight rain on Saturday morning, just enough to leave puddles on the track. It was pretty wet for that practice, then dried up nice. Just went out on DOT's and took the practice slow.

    And back on topic, just bang the shifter back into shape and start hitting up eBay. What year is your bike? Stock rearsets?
    It's an '02, bone stock minus a yoshi rs-3 and the power commander that I haven't had the time to install.

  19. #19
    Senior Member dragos13's Avatar
    Join Date
    Nov 2006
    Location
    Littleton
    Posts
    1,385

    Re: Shifter Pedal got bent today.

    Let me look thru all my boxes tonight, im pretty sure I have a spare shift lever.
    Casey D

Similar Threads

  1. IMI / Erie today!!!
    By silkboxr in forum The Pros
    Replies: 4
    Last Post: Fri Jul 21st, 2006, 11:48 PM
  2. Bent Steel Frame
    By Rick T. in forum Bike Tech
    Replies: 6
    Last Post: Tue Jul 1st, 2003, 09:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •