I can't get the nut that holds the mirror to the bike to come off. Instead the screw that is housed within the mirror came out while I was trying to get the nut off. Any suggestions what I can do?
I can't get the nut that holds the mirror to the bike to come off. Instead the screw that is housed within the mirror came out while I was trying to get the nut off. Any suggestions what I can do?
you vise grips
R.I.P. Lahela 10/12/1986-08/01/2008
Want to become a super hero? http://www.donoralliance.org/info-page-1
"I don't fail I just succeed at finding ways that don't work."
Chris Titus
CSC Spelling Bee Champ 2008 and 2009
If you want to try to save the threads, you can use a double nut on the threads. Tighten the double nuts together to "lock" them together. See if you can get the bottom nut off by trying to remove it while holding the locked nuts with a socket/wrench.
either way will work. if you use the double nut so that you can put the mirror back together make sure you put lock tite on the stud so it will not come out of the mirror again.
Originally Posted by salsashark
and you did it!
the rest of us were just thinking it.
http://www.myspace.com/adrenalineaddiction24
01 zx9r
99 r6 (race bike)
The last time I heard the phrase "mirror screw," it had absolutely NOTHING to do with a motorcycle...
Chris
There's nothing that will ever replace the warm feeling of a perfectly blipped 6th-to-4th downshift, that drops right lane traffic like 1st first semester chem-lab.
or "double nut"
Jon
I appreciate the advice gentlemen.
+1 on the lock-nut or vice grips.
You may want to put some WD-40 or thread penetrator on that, um, nut first.
Just make sure you cover your sensitive parts below the, um, nut so they aren't damaged by the lubricant.
'02 RC-51 - Street
'05 Pitster Pro 125 - Pitbike madness
Be polite. Be professional. But be prepared to kill everyone you meet.
"Motorcycles tell us a more useful truth: we are small and exposed, and probably moving too fast for our own good, but that's no reason not to enjoy every minute of the ride."
~Dave Karlotski
Well I tried your advice and the top section of the screw is so striped now the nut just slides over it. I think I waited until the damage was too far gone to try the double nut technique. If anyone has any cutting tools or whatever please let me know. What sucks is I'm headed to Kansas tomorrow returning Sunday and won't have the bike fix for Mondays trackday. Someone do a lap for me.
Is it something we could fix at the track on Monday? If so, I could bring my Dremel...
'02 RC-51 - Street
'05 Pitster Pro 125 - Pitbike madness
Be polite. Be professional. But be prepared to kill everyone you meet.
"Motorcycles tell us a more useful truth: we are small and exposed, and probably moving too fast for our own good, but that's no reason not to enjoy every minute of the ride."
~Dave Karlotski
Thanks McVaaahhh, my neighbor just told me he has a cutting tool and I think I can squeeze out just enough time tomorrow to get the screw cut and prep the bike before I take off.........so I'm hopeful once again.
You could Dremel the nut off. Split it down the side.
Posting Permissions
Reply With Quote
