So, who wants to spend some quality time with me and help me get the suspension to the SV set up right?
Pretty much what I need is someone to hold my hand and walk me through it.
Thanks,
So, who wants to spend some quality time with me and help me get the suspension to the SV set up right?
Pretty much what I need is someone to hold my hand and walk me through it.
Thanks,
Setting your sag is going to take 2 people, unless you know a stud that can actually hold you upright on the bike, while they're also taking suspension measurements.
Just for your FYI.
~Brandon~
Aprilia RSV 1000 R Factory - "Gemma"
MV Agusta F3 800 - "Amy Lou"
Rattan Fat Bear Plus - "Lynda"
(720) 935-6438
I rarely think of motorcycles without a little yearning. They are about moving, and humans, I think, yearn to move – it’s in our cells, in our desires. We quiet our babies with cyclic movement, and we quiet ourselves by going.
Melissa Holbrook Pierson
No question whatsoever...
get in touch with Dave Rose www.fixmybike.com
it will yeild a well set up bike AND a great education in suspension adjustment and tuning. It might cost you a few bucks, but I promise you'll like the results.
Scott
The easy way is to do this.I have my SV setup like they suggested and its great on the street.
If not, then take it to Dave, Ive always wanted him to setup mine and that guy is a suspension wiz!
What kind of coin does a suspension set up usually cost.
98 VFR 800 (Old faithful)
06 Sprint ST 1050 (Sexual Chocolate)
Get in touch with Dave for sure. I know when he's at the track he charges about $50 and that gets you some consultation for the day. Make a change, go out and try it and come back in to make another change.
IF you need parts, like a different rear spring or fork springs those are extra. In the case of some bikes the front and rear of the bike comes horribly set up from the factory. I know of one case where the back end was set up for about 180 lbs of rider and passenger and the front had springs for about 110 lbs. All in all getting it right is one of the best performance mods you can make.
s
Anyone got a good link to suspension tuning? I set my SV and my Gixxer up to what some folks say is a good starting point (essentially the middle of adjustment ranges). But how do I know if it's optimum for my weight and riding ability? That is, without instrumentation or lap times to be able to tell, other than by feel?
I seem to recall an article someplace that says: if the rear feels like it's skipping on exit, do this, or if it's not turning in do that.
Even if I don't do it myself I want to be able to tell a tech intelligently I need more compression or rebound etc.
Last edited by asp_125; Mon Sep 15th, 2008 at 02:31 PM.
When life throws you curves, aim for the apex
Current stable: 09 Thruxton \ 09 FZ6S2 Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900, 02 VFR800, 08 Spyder RS, 12 Street TripleR, 09 KLX250S, 16 KTMRC390, 10 F650GS
my Facebook, SpeedShots
When talking to a tech (such as Suspension Dave which I highly recommend) you want to tell them "the front is doing this or the rear is doing that" then the suspension tech can say if you need more rebound or less compression.
I have a book called "Sportbike Suspension Tuning" written by Andrew Trevitt. It is very much a beginner type book which covers all settings and how they affect your bike.
Casey D
if we can get 5 people we can have dave do our suspension over here at speer and colfax. LMK who is in. I got me any my buddy that are down to get this done so we need 3 more people
TintTechonline.com or PM me- Tint for your car!!!
Shameless plug: Go buy the book Total Control. There are two excellent sections in there that will help you set up your suspension--not to mention all the riding tips. You can get our book at Barnes and Noble, etc. Nothing like having a bit of knowledge under your belt.
MSF-RiderCoach,TOTAL CONTROL Advanced Riding Clinic-Level 1/Level 2 Instructor
Ricky Orlando Motorcycle School, Rider Workshop-USA
Suspension Academy Graduate 1 + 1 = 3
Writer, 2008 MRA Season Program-Feature Article, "The Colorado Sportbike Club"
*Mngr., TerraNova Team Racing, MRA #112 Andrew Gillespie, Novice GTU Champion/Rookie of the Year-2007
Member: AMA
Red Cross--Disaster Assessment Team Captain, CPR, AED, First Aid, Veteran-USAF-K-9 Handler
i have 2 bikes i want dave to do but they are both over at dallas's house minus fairings and tanks.
+1
My R6 came stock with front springs rated for 110lbs and a rear for 210lbs. (For 2-up riding)
Racetech front springs are a round $115 and easy to install. Best/Cheapest upgrade I've ever done to a bike.
+1 on Dave.
If/When I re-valve the front and replace the rear I'm definitely going to him for the tuning.
Dallas is down in the Springs.
By all accounts he's an excellent welder, not sure if he does side jobs regularly, but I know he's helped a lot of friends out with their welding needs.
Last edited by Sortarican; Thu Sep 18th, 2008 at 11:13 AM.
Be assured that a walk through the ocean of most souls would scarcely get your feet wet.
dallas is in the springs (as noted) i have a trailer so i can haul them wherever, but my concern is the weight difference without the fairings how much will that effect the setup.